Microwave vs conventional porcelain firing: Macroscopic properties
- 21 June 2020
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 17 (5) , 2277-2285
Abstract
This paper provides an overview of the macroscopic properties of porcelain tableware fired in a microwave furnace with six magnetrons (each with a nominal power of 900 W) operating at the frequency of 2.45 GHz. The dependence of firing temperature on physical properties such as shrinkage, water absorption, apparent porosity, bulk density, and impact resistance was analyzed. Emphasis is on the differences in the macroscopic properties of microwave and conventionally (gas and electric) fired porcelain. Batches were fired from room temperature up to above the optimum firing temperature (1380°C). Results show similar macroscopic properties for both firing methods, microwave heating required lower firing temperatures (between 1300°C and 1350°C), and shorter processing times (about 70 minutes). The main differences between microwave and electric firing methods occur in a temperature band of 300°C above the porcelain eutectic temperature (close to 1000°C).Keywords
This publication has 30 references indexed in Scilit:
- A review on the susceptor assisted microwave processing of materialsEnergy, 2016
- Microwave radiation: An alternative method to sinter utilitarian porcelain2011
- Porcelain—Raw Materials, Processing, Phase Evolution, and Mechanical BehaviorJournal of the American Ceramic Society, 1998
- Microwave-assisted firing of ceramics1998
- Microwave-assisted firing of ceramicsPower Engineering Journal, 1996
- Microwave Processing of MaterialsAnnual Review of Materials Science, 1996
- Microwave Processing of Ceramics - An OverviewMRS Proceedings, 1992
- Steady State Temperature Profile in a Sphere Heated by MicrowavesMRS Proceedings, 1992
- Microwave Sintering of Oxide CeramicsMRS Proceedings, 1992
- Microwave Processing of Ceramics: Guidelines Used at the Oak Ridge National LaboratoryMRS Proceedings, 1992