Scalable Multi-Stage CMOS OTAs With a Wide CL-Drivability Range Using Low-Frequency Zeros
Open Access
- 2 November 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (1) , 74-87
Abstract
This work introduces a multi-stage CMOS OTA design technique that allows cascading identical gain stages (for arbitrarily scalable high DC gain) while driving an ultra-wide range of capacitive loads (C $_{\text{L}}$ s). At the heart of the proposed design is a new frequency compensation technique (FCT) that relies on low-frequency left-half-plane zeros to allow the proposed OTA to operate for a desired closed-loop behavior. In this work, classical gain-stages (i.e., differential pair and common source transistors) are used to design fully-differential 2-, 3-, 4-and 5-stage CMOS OTAs. The proposed 2-to-4-stage designs have been fabricated in TSMC 65 nm CMOS process and the measurement results show that the 2-stage OTA is achieving a DC gain of 50 dB with a C $_{\text{L}}$ -drivability ratio (i.e., C $_{\text{L,max}}$ /C $_{\text{L,min}}$ ) of 10,000 $\times$ , the 3-stage OTA is achieving a DC gain of 70 dB with a C $_{\text{L}}$ -drivability of 1,000,000 $\times$ , and the 4-stage OTA is achieving a DC gain of 90 dB with a C $_{\text{L}}$ -drivability of 1,000,000 $\times$ . This is a 10-to-1000-time improvement in the state-of-the-art, as the highest C $_{\text{L}}$ -drivability reported to date is 1000 $\times$ . Accordingly, the proposed OTAs can cover a wider range of applications than any other reported works.Keywords
Funding Information
- Natural Sciences and Engineering Research Council (NSERC) Discovery Grant
- James McGill Research Chair Grant
This publication has 34 references indexed in Scilit:
- A Cascode Miller-Compensated Three-Stage Amplifier With Local Impedance Attenuation for Optimized Complex-Pole ControlIEEE Journal of Solid-State Circuits, 2014
- A 0.0045- $\hbox{mm}^{2}$ 32.4- $\mu\hbox{W} $ Two-Stage Amplifier for pF-to-nF Load Using CM Frequency CompensationIEEE Transactions on Circuits and Systems II: Express Briefs, 2014
- A Signal- and Transient-Current Boosting Amplifier for Large Capacitive Load ApplicationsIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- Methodology for designing and verifying switched‐capacitor sample and hold circuits used in data convertersIET Circuits, Devices & Systems, 2014
- A low‐power four‐stage amplifier for driving large capacitive loadsInternational Journal of Circuit Theory and Applications, 2013
- A 0.016-mm$^{2}$ 144-$\mu$W Three-Stage Amplifier Capable of Driving 1-to-15 nF Capacitive Load With $> $0.95-MHz GBWIEEE Journal of Solid-State Circuits, 2013
- Design of Three-Stage Class-AB 16 $\Omega$ Headphone Driver Capable of Handling Wide Range of Load CapacitanceIEEE Journal of Solid-State Circuits, 2009
- A capacitor-free cmos low-dropout regulator with damping-factor-control frequency compensationIEEE Journal of Solid-State Circuits, 2003
- An unconditionally stable two-stage CMOS amplifierIEEE Journal of Solid-State Circuits, 1995
- Relationship between frequency response and settling time of operational amplifiersIEEE Journal of Solid-State Circuits, 1974