A high sensitivity momentum flux measuring instrument for plasma thruster exhausts and diffusive plasmas
- 1 May 2009
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 80 (5) , 053509
Abstract
A high sensitivity momentum flux measuring instrument based on a compound pendulum has been developed for use with electric propulsion devices and radio frequency driven plasmas. A laser displacement system, which builds upon techniques used by the materials science community for surface stress measurements, is used to measure with high sensitivity the displacement of a target plate placed in a plasma thruster exhaust. The instrument has been installed inside a vacuum chamber and calibrated via two different methods and is able to measure forces in the range of 0.02–0.5mN with a resolution of 15μN. Measurements have been made of the force produced from the cold gas flow and with a discharge ignited using argon propellant. The plasma is generated using a Helicon Double Layer Thruster prototype. The instrument target is placed about 1 mean free path for ion-neutral charge exchange collisions downstream of the thruster exit. At this position, the plasma consists of a low density ion beam (10%) and a much larger downstream component (90%). The results are in good agreement with those determined from the plasma parameters measured with diagnostic probes. Measurements at various flow rates show that variations in ion beam velocity and plasma density and the resulting momentum flux can be measured with this instrument. The instrument target is a simple, low cost device, and since the laser displacement system used is located outside the vacuum chamber, the measurement technique is free from radio frequency interference and thermal effects. It could be used to measure the thrust in the exhaust of other electric propulsion devices and the momentum flux of ion beams formed by expanding plasmas or fusion experiments.Keywords
This publication has 35 references indexed in Scilit:
- Validating a Plasma Momentum Flux Sensor to an Inverted Pendulum Thrust StandJournal of Propulsion and Power, 2009
- Compact cantilever force probe for plasma pressure measurementsReview of Scientific Instruments, 2007
- Edge plasma pressure measurements using a mechanical force sensor on the tokamak ISTTOKPlasma Physics and Controlled Fusion, 2007
- Momentum and Heat Flux Measurements Using an Impact Target in Flowing PlasmaJournal of Propulsion and Power, 2006
- Momentum flux measuring instrument for neutral and charged particle flowsReview of Scientific Instruments, 2002
- A double pendulum plasma thrust balance and thrust measurement at a tandem mirror exhaustReview of Scientific Instruments, 1995
- SiO2 deposition from oxygen/silane pulsed helicon diffusion plasmasApplied Physics Letters, 1995
- An instrument for measuring the momentum flux from atomic and charged particle jetsReview of Scientific Instruments, 1990
- Hollow ballistic pendulum for plasma momentum measurementsReview of Scientific Instruments, 1988
- Ballistic pendula for measuring the momentum of a laser-produced plasmaReview of Scientific Instruments, 1982