Numerical Evaluation of the Flow Quality of a Large-Scale Low-Speed Wind Tunnel via Steady CFD Simulation
Open Access
- 26 August 2026
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 18 (17) , 8764
Abstract
This study presents a full-scale steady CFD methodology for evaluating flow quality in a large-scale low-speed wind tunnel (8 m × 6 m test section, 130 m/s). The tunnel geometry is resolved at 1:1 scale, the damping screens and honeycomb are modeled as porous media, and results are validated against wind tunnel test data and the GJB 1179A-2012 acceptance criteria. The baseline configuration reproduces the axial static pressure gradient within the acceptance criterion but substantially overpredicts turbulence intensity, dynamic pressure coefficient, and both velocity direction deviation angles. Damping screens, modeled as porous jumps, provide the dominant correction, bringing all metrics within the acceptance limits. Adding honeycomb yields incremental improvement: porous zone modeling preserves or improves all metrics, whereas a porous jump representation pushes velocity direction deviations beyond the limit. Between RNG k-ε and SST k-ω, only turbulence intensity is closure-dependent, with RNG k-ε closer to experiment. At Ma ≈ 0.38, compressibility does not alter the flow quality assessment, confirming that incompressible assumption is sufficient. By replacing costly physical trials with a validated CFD workflow, these findings provide a practical, resource-efficient reference for the CFD-based evaluation, design, and retrofit of wind tunnel infrastructure that underpins renewable-energy and energy-efficiency research.Keywords
Funding Information
- China Construction Eighth Engineering Division (2024-3-03)
- China Construction Eighth Engineering Division (2025-3-04)
- China State Construction Engineering Corporation (CSCEC-2025-Z-15)
This publication has 43 references indexed in Scilit:
- A pressure-loss model for flow-through round-hole perforated plates of moderate porosity and thickness in laminar and turbulent flow regimesInternational Journal of Heat and Mass Transfer, 2024
- Effects of corner-recession on wind-induced responses and aerodynamic damping of a square megatall building under twisted wind flowJournal of Building Engineering, 2023
- Effect of the combined aerodynamic control on the amplitude characteristics of wind loads on a tall buildingEngineering Structures, 2021
- Wind-induced responses of tall buildings under combined aerodynamic controlEngineering Structures, 2018
- A century of wind tunnels since EiffelComptes Rendus Mécanique, 2017
- Numerical modeling of anisotropic drag for a perforated plate with cylindrical holesChemical Engineering Science, 2016
- CFD modelling and validation of measured wind field data in a portable wind tunnelAeolian Research, 2011
- Indicators for the evaluation of wind tunnel test section flow quality and application to a numerical closed-circuit wind tunnelJournal of Wind Engineering and Industrial Aerodynamics, 2007
- Numerical modeling of the flow conditions in a closed-circuit low-speed wind tunnelJournal of Wind Engineering and Industrial Aerodynamics, 2006
- Wind tunnels for industrial aerodynamicsJournal of Wind Engineering and Industrial Aerodynamics, 1984