Rheological properties of blends of linear and long‐chain branched polypropylenes
- 19 November 2009
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 50 (1) , 191-199
Abstract
Blends of a long‐chain branched polypropylene (LCB‐PP) and a linear polypropylene (L‐PP) were prepared using a twin‐screw extruder. Linear viscoelastic properties such as complex viscosity, storage modulus, and weighted relaxation spectrum were determined as functions of LCB‐PP content. Shear data obtained from commercial rheometers as well as from a slit‐die rheometer were used to verify the Cox‐Merz relation for the neat components as well as for a blend. Elongational properties were obtained using a Sentmanat Extensional Rheometer (SER) unit mounted on an Advanced Rheometric Expansion System (ARES) rheometer and the converging die. A significant strain hardening was observed for the neat LCB‐PP as well as for all the blends, but the strain hardening decreased with increasing strain rate. The apparent steady elongational viscosity values evaluated using the converging die were observed to be comparable at high deformation rates to those obtained from the SER unit, but the differences increased as the strain rate decreased. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics EngineersKeywords
This publication has 25 references indexed in Scilit:
- Properties of blends of linear and branched polypropylenes in film blowingThe Canadian Journal of Chemical Engineering, 2008
- Thermal and rheological properties of mLLDPE/LDPE blendsPolymer Engineering & Science, 2005
- Shear and extensional properties of short glass fiber reinforced polypropylenePolymer Composites, 2005
- Long-Chain Branched Polypropylenes by Electron Beam Irradiation and Their Rheological PropertiesMacromolecules, 2004
- Elongational rheology of LLDPE / LDPE blendsJournal of Applied Polymer Science, 2003
- Melt strength of linear low‐density polyethylene/low‐density polyethylene blendsJournal of Applied Polymer Science, 2002
- Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological propertiesPolymer Engineering & Science, 2000
- Microstructure and rheology of polymer melts reinforced by long glass fibres: direct simulationsJournal of Non-Newtonian Fluid Mechanics, 1997
- Estimation of the elongational viscosity of polyethylene blends at high deformation ratesJournal of Non-Newtonian Fluid Mechanics, 1989
- An approximate analysis for contraction and converging flowsJournal of Non-Newtonian Fluid Mechanics, 1988