Abstract
Currently, self‑expanding endobiliary stents are increasingly used not only in the treatment of malignant biliary tract obstruction, but also in benign lesions of the distal biliary tract, which makes research in this area highly relevant. Based on the significance of this problem, the aim of the study is formulated: to assess the influence of the length of the intraduodenal part of a covered endobiliary stent on the likelihood of duodeno‑biliary reflux using computational fluid dynamics (CFD) methods. The work is devoted to mathematical modelling of bile and duodenal content flow, accounting for peristalsis, with varying lengths of the intraduodenal part of a covered endobiliary stent. A standard covered endobiliary stent is considered, and a mathematical model is developed to analyze two configurations of its working position – with an intraduodenal part 25 mm and 50 mm in length. The influence of the stent’s intraduodenal length on the probability of duodeno‑biliary reflux is evaluated based on the presence or absence of flow vortices. In the 2D case, the intestine during peristalsis is modelled as a fixed deformed geometry, approximately corresponding to the contracted state. In the 3D case, a more realistic representation of intestinal peristalsis is achieved by sequentially radially compressing segments of the wall. Numerical simulations are performed in the Ansys Fluent software package using a multiphase VOF (Volume of Fluid) model. It is found that the configuration with a 50 mm intraduodenal part is preferable in terms of reducing reflux risk: no reverse flow into the stent is observed. In contrast, with a 25 mm length, flow swirling forms in the stent lumen, promoting reflux. It is shown that the 3D formulation more fully reproduces the spatial flow pattern and lumen geometry compared to the 2D approach, making it preferable for further studies. The results are in good agreement with clinical observations, according to which an excessively short intraduodenal stent part promotes duodeno‑biliary reflux. Given that the proposed model includes several assumptions and has certain limitations, the conclusion about the preference for a 50 mm length should be considered together with the risk of mechanical damage to the intestinal wall and the stent itself. To improve model reliability, further refinement and validation are needed in future work.