UV-Resistant Self-Healing Emulsion Glass as a New Liquid-like Solid Material for 3D Printing
- 4 May 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (21) , 24450-24457
Abstract
Directly writing 3D structures into supporting mediums is a relatively new developing technology in additive manufacturing. In this work, durable and recyclable liquid-like solid (LLS) materials are developed as supporting mediums that are stable for both UV- and thermal-solidification. Our LLS material is comprised of densely packed oil droplets in a continuous aqueous medium, known as emulsion glass. Its elastic nature emerges from the jammed structure of oil droplets, which offers this LLS material rapidly self-healing ability. Moreover, the yield stress of the glass is relatively low and can be tuned by the viscosity and weight percentage of oil. The capability of the emulsion glass as supporting mediums is successfully demonstrated by directly writing and then curing designed structures. The emulsion glass has been repeatedly used at least 6 times upon exposure to UV irradiation and heat, implying it can expand the applications of supporting medium to the writing process involving UV- and thermal-curable inks simultaneously.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan
This publication has 24 references indexed in Scilit:
- Liquid-like Solids Support Cells in 3DACS Biomaterials Science & Engineering, 2016
- 3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible EmbeddingACS Biomaterials Science & Engineering, 2016
- Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogelsScience Advances, 2015
- Printability of elastomer latex for additive manufacturing or 3D printingJournal of Applied Polymer Science, 2015
- Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing HydrogelsAdvanced Materials, 2015
- High internal phase emulsion gels (HIPE-gels) prepared using food-grade componentsRSC Advances, 2014
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting TechnologiesJournal of Materials Science & Technology, 2012
- Rheology of gelling and yielding soft matter systemsSoft Matter, 2008
- Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cellsJournal of Power Sources, 2007
- Nonergodic states of charged colloidal suspensions: Repulsive and attractive glasses and gelsPhysical Review E, 2004