The location effect on IN625 fabricated by the laser powder bed fusion process
Open Access
- 1 January 2025
- conference paper
- Published by Materials Research Forum, LLC in Materials Research Proceedings
- Vol. 54, 78-86
Abstract
Laser Powder Bed Fusion (L-PBF) has emerged as a transformative additive manufacturing technique, enabling the production of components with complex geometries and advanced material properties. This study investigates the processing of Inconel 625 through L-PBF, focusing on enhancing porosity control and mechanical performance. The research employed commercially available Inconel 625 powder and various parameters, including laser power, scanning speed, and layer thickness, were considered to achieve defect-free structures. Vickers hardness, porosity analysis, and metallographic etching were used to evaluate the mechanical properties and microstructural characteristics of the printed samples. The results demonstrated an average porosity of 0.12%, with the smallest pores dominating the microstructure.Keywords
This publication has 28 references indexed in Scilit:
- Effects of process parameters and scan strategy on the microstructure and density of stainless steel 316 L produced via laser powder bed fusionJournal of Alloys and Metallurgical Systems, 2023
- Effect of temperature and medium environment on corrosion fatigue behavior of Inconel 625Materials and Corrosion, 2023
- Increasing productivity of laser powder bed fusion manufactured Hastelloy X through modification of process parametersJournal of Manufacturing Processes, 2022
- Process parameter selection and optimization of laser powder bed fusion for 316L stainless steel: A reviewJournal of Manufacturing Processes, 2022
- Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion processThe International Journal of Advanced Manufacturing Technology, 2020
- A review of technological improvements in laser-based powder bed fusion of metal printersThe International Journal of Advanced Manufacturing Technology, 2020
- Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical propertiesInternational Journal of Refractory Metals and Hard Materials, 2019
- Mitigation of lack of fusion defects in powder bed fusion additive manufacturingJournal of Manufacturing Processes, 2018
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive ManufacturingMetallurgical and Materials Transactions A, 2017
- Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal DepositionAdvanced Engineering Materials, 2016