Crack growth in a piezoelectric material with a Griffith crack perpendicular to the poling axis
Authors:
- 21 June 2004
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 84 (18) , 1789-1820
Abstract
Experimental results for cracked piezoelectric materials demonstrate that applied electric fields can enhance or inhibit crack growth, which cannot be explained via stress intensity factor K σ and energy release rate G, but may be predicted according to the fracture criterion of mechanical strain energy release rate G m. However, the G m criterion fails to predict the experimental observation that purely electric fields can drive crack growth in a poled ferroelectric ceramic. In this paper, using electric boundary conditions dependent on the crack-opening displacement, the nonlinear relation between the electric displacement at the crack faces and applied loading is given explicitly. The Fourier transform technique is employed to reduce the problem to dual-integral equations. Solving the resulting equations, expressions for the electroelastic field in the entire plane are obtained for a piezoelectric material weakened by a Griffith crack perpendicular to the poling axis. The distribution of asymptotic field and the intensity factors of electroelastic field as well as the elastic T-stress are determined. In particular, the strain intensity factor K s is suggested as a fracture criterion for piezoelectric materials, which can explain successfully relevant experimental results. Results reveal that an applied electric field tends to cause crack to open or close, depending on its positive or negative direction. A comparison of numerical results for -5H indicates that the K s criterion is superior to other fracture criteria.Keywords
This publication has 41 references indexed in Scilit:
- The electrical potential difference across cracks in PZT measured by Kelvin Probe Microscopy and the implications for fractureActa Materialia, 2003
- On the electrical boundary conditions on the crack surfaces in piezoelectric ceramicsInternational Journal of Engineering Science, 2003
- A maximum strain criterion for electric-field-induced fatigue crack propagation in ferroelectric ceramicsMaterials Science and Engineering: A, 2001
- Energy density theory formulation and interpretation of cracking behavior for piezoelectric ceramicsTheoretical and Applied Fracture Mechanics, 2000
- Fracture of piezoelectric materials: energy density criterionTheoretical and Applied Fracture Mechanics, 2000
- Crack tip energy release rate for a piezoelectric compact tension specimenEngineering Fracture Mechanics, 1999
- Singular stress and electric fields of a piezoelectric ceramic strip with a finite crack under longitudinal shearActa Mechanica, 1997
- Crack propagation in piezoelectric materials under combined mechanical and electrical loadingsActa Materialia, 1996
- Linear dielectric-breakdown electrostaticsPhysical Review B, 1988
- On the maximum strain criterion—a new approach to the angled crack problemEngineering Fracture Mechanics, 1981