Semi-analytical approach for time-dependent load–settlement response of a jacked pile in clay strata
Authors:
- 1 December 2017
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 54 (12) , 1682-1692
Abstract
Mechanical behaviour of the soil around a jacked pile changes significantly during pile installation and subsequent consolidation. Hence, an axially loaded jacked pile exhibits apparent time-dependent bearing performance after pile installation. This paper presents a semi-analytical approach to predict the time-dependent bearing performance of an axially loaded jacked pile in saturated clay strata. The effects of pile installation and subsequent consolidation on the changes in mechanical properties of the surrounding soil are modeled by the cavity expansion theory and the radial consolidation theory, respectively. An exponential function–based load-transfer (t–z) curve is employed to describe the nonlinear behaviour of the pile–soil interface during pile loading. The evolutions of the three-dimensional strength and shear modulus of the surrounding soil are subsequently incorporated into the two model parameters of the proposed t–z curve to capture the time-dependent pile–soil interaction behaviour. The time-dependent elastic response of the soil outside the pile–soil interface is also considered in the proposed approach. With the proposed load-transfer curve, an incremental algorithm and a corresponding computational code are developed for assessing the time-dependent load–settlement response of a jacked pile. To verify the proposed semi-analytical approach, predictions of the time-dependent load–settlement curves are compared with the measured values from pile tests at two sites. The good agreement shows that the time-dependent bearing performance can be reasonably predicted by the proposed approach.Keywords
This publication has 33 references indexed in Scilit:
- Pile Setup in Cohesive Soil. II: Analytical Quantifications and Design RecommendationsJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Pile Setup in Cohesive Soil. I: Experimental InvestigationJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Setup of Driven Piles in Layered SoilSoils and Foundations, 2010
- Incorporating set-up into reliability-based design of driven piles in clayCanadian Geotechnical Journal, 2006
- Application of an effective stress design method to concrete piles driven in Mexico City clayCanadian Geotechnical Journal, 2005
- A simplified nonlinear approach for pile group settlement analysis in multilayered soilsCanadian Geotechnical Journal, 2001
- Undrained cavity expansion in modified Cam clay I: Theoretical analysisGéotechnique, 2001
- The Cam-Clay Models Revised by the SMP CriterionSoils and Foundations, 1999
- Bearing capacity of friction piles in marine clayGéotechnique, 1987
- An analysis of the vertical deformation of pile groupsGéotechnique, 1979