Numerical Investigation of Charging and Discharging Processes of a Shell and Tube Nano-Enhanced Latent Thermal Storage Unit
- 28 February 2020
- journal article
- research article
- Published by Wiley in Journal of Thermal Science and Engineering Applications
- Vol. 12 (2) , 1-23
Abstract
Phase change materials (PCMs) generally suffer from low thermal conductivity which limits their application in thermal systems. The effective thermal conductivity may be improved by including fins, metallic powders, fine wires, and nanoparticles. The objective of this study is to investigate the thermal performance of graphene nanoplatelets (GNPs) dispersed in small quantities in 1-tetradecanol (C14H30O) PCM. This nano-enhanced PCM (NPCM) is placed in the annular space of a shell and tube in a solar thermal storage unit. The numerical simulations have been carried out using a numerical model based on the enthalpy-porosity and the control volume methods. The numerical model has been successfully validated by comparison with experimental data available in the literature. The numerical results showed that the higher the GNPs concentration, the lower the stored energy. The higher the GNPs concentration the shorter the discharging time. But, during the charging process, though the reduction in the melting time by 9.5% for GNPs concentration increase from 0 to 1 wt%, the melting time increased in contrast by 10.5% for GNPs content increasing from 1 to 3 wt%. For the GNPs concentration of 3 wt%, the heat transfer rate enhancement was limited by an undesirable increase in viscosity which led to weak natural convection and hence a longer charging time. Thus, the GNPs concentration of 1 wt% showed better thermal performance than that of 3 wt% concentration. These results may guide the improvement of solar thermal storage by dispersing GNPs in PCM.Keywords
This publication has 38 references indexed in Scilit:
- Recent progress in solar thermal energy storage using nanomaterialsRenewable and Sustainable Energy Reviews, 2017
- Review on Phase Change Materials with Nanoparticle in Engineering ApplicationsJournal of Engineering Science and Technology Review, 2016
- A review on thermophysical properties of nanoparticle dispersed phase change materialsEnergy Conversion and Management, 2015
- Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical finsApplied Thermal Engineering, 2008
- Cascaded latent heat storage for parabolic trough solar power plantsSolar Energy, 2007
- Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrixEnergy Conversion and Management, 2005
- A Two-Temperature Model for Solid-Liquid Phase Change in Metal FoamsJournal of Heat Transfer, 2004
- Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unitSolar Energy, 1997
- Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tubeInternational Journal of Heat and Mass Transfer, 1993
- Thermal Performance of a Heat Storage Module Using PCM’s With Different Melting Temperatures: Mathematical ModelingJournal of Solar Energy Engineering, 1989