Effect of ultrasonic and different modification treatments on the microstructure of cast Al-Si-Cu-Mg-Ni alloy
- 3 June 2021
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 101 (15) , 1750-1764
Abstract
The Al-Si-Cu-Mg-Ni alloy is a commonly used piston alloy. In this work, different amounts of phosphorus modifier and Al-2P (Al-2%P) master alloy modifier were added to the original alloy. The ultrasonic melt treatment method was also applied to improved the microstructure of near-eutectic multi-cast Al–Si alloys. Investigation was performed by means of optical microscopy and scanning electron microscopy. The results show that the effect of Al-2P master alloy modifier is more stable. However, the phosphorus modifier requires a higher amount of addition to achieve a refinement effect similar to that of the Al-2P modifier. The external ultrasonic field mainly acts on the AlP particle. The heterogeneous nucleation of the primary Si phase and the AlP clusters formed by the phosphorus modifier are more aggregated than the fine-dispersed AlP particles formed by the Al-2P master alloy modifier in the melt. Hence the ultrasonic melt treatment is more effective for the phosphorus modification.Keywords
Funding Information
- the project of China (41422010605)
- the major industrial chain project of Shannxi Province (2018ZDCXL-GY-09-08)
- the major R&D project of Shandong Province (2018JMRH0212)
- Overall planning project of Shaanxi Province (S2018-YF-ZDLGY-0070)
This publication has 24 references indexed in Scilit:
- Fracture and Fatigue Behaviour of Aluminium Matrix Composite Automotive PistonsApplied Composite Materials, 2009
- Modification of hypoeutectic Al–Si alloys with scandiumJournal of Alloys and Compounds, 2009
- A new technique to modify hypereutectic Al–24%Si alloys by a Si–P master alloyJournal of Alloys and Compounds, 2009
- Influence of Rapid Solidification of Cu-P Intermediate Alloy on Wear Resistance of Al-Si alloyRare Metal Materials and Engineering, 2008
- Fatigue on engine pistons – A compendium of case studiesEngineering Failure Analysis, 2006
- Influence of high-intensity ultrasound on grain refining performance of Al–5Ti–1B master alloy on aluminiumMaterials Science and Engineering: A, 2005
- Effect of power ultrasound on solidification of aluminum A356 alloyMaterials Letters, 2005
- An Overview of the Development of Al-Si-Alloy Based Material for Engine ApplicationsJournal of Materials Engineering and Performance, 2003
- Elevated Temperature Fatigue of Al-Si Piston AlloysMaterials Science Forum, 2002
- Modification of Al-Si alloys: Microstructure, thermal analysis, and mechanismsJOM, 1995