Nanocoating hybrid polymer films on large quantities of cohesive nanoparticles by molecular layer deposition
- 20 February 2009
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 55 (4) , 1030-1039
Abstract
The conformal coating of ultra‐thin aluminum alkoxide (alucone) polymer films on primary silica and titania nanoparticles using molecular layer deposition (MLD) in a fluidized bed reactor from 100 to 160 °C is described. In situ mass spectrometry revealed that the growth of alucone MLD films was self‐limiting as a function of the individual trimethylaluminum and ethylene glycol exposures. The composition and highly conformal alucone films throughout the surface of both silica and titania nanoparticles were confirmed. The highest growth rate was observed at the lowest sample temperature. Primary nanoparticles were coated individually despite their strong tendency to aggregate during fluidization. Based on the results of chemical and thermogravimetric analysis, the value of x in the formula of Al(OCH2CH2O)x was estimated to be 1.9. The calculated film density slightly increased from 2.0 ± 0.1 to 2.2 ± 0.1 g/cm3 with the increasing of temperature from 100 to 160 °C. © 2009 American Institute of Chemical Engineers AIChE J, 2009Keywords
This publication has 42 references indexed in Scilit:
- Barrier properties of polymer/alumina nanocomposite membranes fabricated by atomic layer depositionJournal of Membrane Science, 2008
- Atomic layer deposition of TiO2 films on particles in a fluidized bed reactorPowder Technology, 2008
- Synthesis of a Novel Porous Polymer/Ceramic Composite Material by Low-Temperature Atomic Layer DepositionChemistry of Materials, 2007
- Effect of vibration on agglomerate particulate fluidizationAIChE Journal, 2006
- Conformal nanocoating of zirconia nanoparticles by atomic layer deposition in a fluidized bed reactorNanotechnology, 2005
- Vibro-fluidization of fine boron nitride powder at low pressurePowder Technology, 2001
- Atomic Layer Deposition of SiO2 Films on BN Particles Using Sequential Surface ReactionsChemistry of Materials, 2000
- Reaction of Al(tBu)3 with Ethylene Glycol: Intermediates to Aluminum Alkoxide (Alucone) Preceramic PolymersChemistry of Materials, 1999
- Layer-by-layer polycondensation of nylon 66 by alternating vapour deposition polymerizationPolymer, 1997
- Reaction mechanism in chemisorption kinetics: nitrogen on the {100} plane of tungstenProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1974