The piperazine pyrophosphate intumescent flame retardant of polypropylene composites prepared by selective laser sintering
Authors:
- 16 September 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (1) , 305-317
Abstract
A highly flame‐retardant PP composite powder suitable for selective laser sintering (SLS) was prepared successfully by mechanical blending, which was composed of pure PP, piperazine pyrophosphate (PPAP), melamine polyphosphate (MPP), and triazine‐based charring‐foaming agent (CFA). The results showed that the flowability of PP composite powder decreased by about 40% and the DSC data indicated the sintering window decreased by about 2°C. Although the flame retardants influenced the processing of SLS, the PP composite powder was still able to be used for printing. The LOI value of PP composites prepared by SLS was 29.2% and the UL‐94 grade was V‐0 rating at the filler loading (16wt% PPAP, 4wt% MPP, 4wt% CFA). The cone calorimeter testing (CCT) data represented that the heat and smoke release significantly decreased. The synergistic effect among flame retardants promoted high‐quality char layers, which is favorable for improving the flame retardancy and thermal stability of PP composites by the test of TGA, SEM, Raman spectra, and FT‐IR. However, the flame retardancy and mechanical properties of PP composites made by SLS were both in varying degrees of decline compared to the ones made by thermo‐compression (TC) because of the higher porosity. An air duct with complex structures was prepared by SLS at last.Keywords
Funding Information
- National Natural Science Foundation of China
This publication has 39 references indexed in Scilit:
- Synthesis of N-methyl triazine-ethylenediamine copolymer charring foaming agent and its enhancement on flame retardancy and water resistance for polypropylene compositesPolymer Degradation and Stability, 2016
- Synergistic flame-retardant effect of expandable graphite and phosphorus-containing compounds for epoxy resin: Strong bonding of different carbon residuesPolymer Degradation and Stability, 2016
- A review of application of ammonium polyphosphate as intumescent flame retardant in thermoplastic compositesComposites Part B: Engineering, 2016
- Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterpartsMaterials & Design, 2015
- MoS2 Nanolayers Grown on Carbon Nanotubes: An Advanced Reinforcement for Epoxy CompositesACS Applied Materials & Interfaces, 2015
- Study of the Synergistic Effect of Nanoporous Nickel Phosphates on Novel Intumescent Flame Retardant Polypropylene CompositesJournal of Spectroscopy, 2015
- Simultaneous improvement in the flame retardancy and water resistance of PP/APP through coating UV-curable pentaerythritol triacrylate onto APPChinese Journal of Polymer Science, 2014
- Synthesis of N-ethyl triazine–piperazine copolymer and flame retardancy and water resistance of intumescent flame retardant polypropylenePolymer Degradation and Stability, 2013
- Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sinteringPhysics Procedia, 2010
- Effect of a novel charring–foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylenePolymer Degradation and Stability, 2006