Design and Analysis of Propeller for High-Altitude Search and Rescue Unmanned Aerial Vehicle
Open Access
- 22 January 2021
- journal article
- research article
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2021, 1-13
Abstract
The commercially available unmanned aerial vehicles are not good enough for search and rescue flight at high altitudes. This is because as the altitude increases, the density of air decreases which affects the thrust generation of the UAV. The objective of this research work is to design thrust optimized blade for an altitude range of 3,0005,000m with a density of air 0.7364kg/m3, respectively, and perform thrust analysis. The property of aluminum alloy 1,060 being lightweight is chosen for designing and testing of blade. The blade element theory-based design and analysis code was developed, and user-friendly aerodynamic inputs were used to obtain the desired outputs. The geometry designed for an altitude range of 3,000-5,000m faced the total stress of 6.0MPa which was at 70 of the blade span. This stress is within the limit of yield strength of the aluminum alloy, 28MPa. The modal analysis shows the first natural frequency occurs at around 12,000 RPM which is safe for operating the blade at 0-5,000 RPM. Experimental analysis of the blade gave a thrust of 0.92N at 2,697 RPM at 1,400m. The analytical solution for thrust with the same conditions was 1.7N with 85.6 efficiency. The validation of experimental results has been done by the CFD analysis. The CFD analysis was performed in ANSYS CFX which gave a thrust value of 2.27N for the same boundary conditions. Thus, the blade designed for high altitude SAR UAV is structurally safe to operate in 0-5,000 RPM range, and its use in search missions could save many lives in the Himalayas.Keywords
Funding Information
- Nepal Academy of Science and Technology
This publication has 31 references indexed in Scilit:
- Aerodynamic performance prediction of SG6043 airfoil for a horizontal-axis small wind turbineJournal of Physics: Conference Series, 2020
- An Aerodynamic Comparative Analysis of Airfoils for Low-Speed AircraftsInternational Journal of Engineering Research & Technology, 2016
- Solar-powered airplanes: A historical perspective and future challengesProgress in Aerospace Sciences, 2014
- Wind Tunnel Tests of Wind Turbine Airfoils at High Reynolds NumbersJournal of Physics: Conference Series, 2014
- Sizing and preliminary hardware testing of solar powered UAVThe Egyptian Journal of Remote Sensing and Space Sciences, 2013
- Design of a low Reynolds number airfoil for small horizontal axis wind turbinesRenewable Energy, 2012
- HELIPLAT: Design, Aerodynamic, Structural Analysis of Long- Endurance Solar-Powered Stratospheric PlatformJournal of Aircraft, 2004
- Precision Agriculture as a Commercial Application for Solar-Powered Unmanned Aerial Vehicles2002
- New technologies to support NASA's Mission to Planet Earth satellite remote sensing product validation: use of an unmanned autopiloted vehicle (UAV) as a platform to conduct remote sensing1998
- New Airfoils for Small Horizontal Axis Wind TurbinesJournal of Solar Energy Engineering, 1998