Load Ratio Effect on the Fatigue Behaviour of Adhesively Bonded Joints: An Enhanced Damage Model
- 12 March 2010
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 86 (3) , 257-272
Abstract
Structural adhesives are used widely in aerospace and automotive applications. However, fatigue damage in these adhesives is an important factor to be considered in the design of adhesively bonded structural members that are subjected to cyclic loading conditions during their service life. Fatigue life of adhesively bonded joints depends mainly on the fatigue load and the load ratio. A fatigue damage model is presented in this paper to include the effect of fatigue mean stresses on the failure behaviour of adhesively bonded joints. The fatigue damage model is developed using an effective strain-based approach. The model is implemented on a tapered single lap joint configuration and is validated by experimental test results. The adhesive layer in the tapered single lap joint is modelled by using a cohesive zone with a bi-linear traction-separation response. The adverse effect of increasing fatigue mean stresses on the failure behaviour of adhesively bonded joints is successfully predicted.Keywords
This publication has 19 references indexed in Scilit:
- Mean stress/strain effect on fatigue behavior of an epoxy resinInternational Journal of Fatigue, 2007
- The dependence of the fatigue life of adhesive joints on surface preparationInternational Journal of Adhesion and Adhesives, 2006
- The effect of mean stress on the fatigue behavior of 316 LN stainless steel in air and mercuryJournal of Nuclear Materials, 2003
- Model for predicting the load ratio for the shortest fatigue lifeComposites Science and Technology, 2001
- Adhesive bonding of aircraft structuresInternational Journal of Adhesion and Adhesives, 2000
- Low-cycle fatigue life of SiC-particulate-reinforced Al-Si cast alloy composites with tensile mean strain effectsInternational Journal of Fatigue, 1999
- Assessing stress state and mean load effects on the fatigue response of adhesively bonded jointsInternational Journal of Adhesion and Adhesives, 1999
- Fatigue issues in aircraft maintenance and repairsInternational Journal of Fatigue, 1998
- Mean stress models for low-cycle fatigue of a nickel-base superalloyInternational Journal of Fatigue, 1994
- Fatigue life evaluation of structural adhesives for automative applicationsInternational Journal of Adhesion and Adhesives, 1992