Impact of Print Speed on Strength of Samples Printed in FDM Technology
Author:
Open Access
- 1 June 2019
- journal article
- research article
- Published by Walter de Gruyter GmbH in Agricultural Engineering
- Vol. 23 (2) , 33-38
Abstract
This paper presents research on the impact of printing speed on the strength of a manufactured object and is the next stage of the author's research on the impact of technological parameters of 3D printing on the strength of printed models. The tested universal specimens were printed using the FDM (Fused Deposition Modeling) method from PLA (polylactic acid, polylactide). The paper presents the maximum breaking force of the samples and the time of printing samples depending on the printing speed, which varied from 20 mm·s−1 to 100 mm·s−1. The research indicates that the strength of samples decreases with increasing speed. In the range of 50-80 mm·s−1, the strength of the specimens remined at a similar level, however, above 80 mm·s−1, it decreased significantly.Keywords
This publication has 6 references indexed in Scilit:
- Bending strength test of specimens printed in FDM technology with hexagonal, concentric and triangle fillingMechanik, 2018
- Badanie wytrzymałości na rozciąganie próbek wydrukowanych w technologii FDM z różną gęstością wypełnienia – wypełnienie heksagonalne i koncentrycznePRZEGLĄD MECHANICZNY, 2017
- Advances in 3D Printing & Additive Manufacturing Technologies2017
- Bending strength test of speciments printed in FDM technology with different filling densityMechanik, 2016
- Optimization of rapid prototyping parameters for production of flexible ABS objectJournal of Materials Processing Technology, 2005
- Critical parameters influencing the quality of prototypes in fused deposition modellingJournal of Materials Processing Technology, 2001