Combined Predictive and Feedback Contour Error Control With Dynamic Contour Error Estimation for Industrial Five-Axis Machine Tools
Authors:
- 21 July 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (7) , 6668-6677
Abstract
This article proposes a real-time method to control the contour error for industrial five-axis machine tools by combining the generalized predictive control (GPC) and the feedback correction (FBC) with dynamic contour error estimation (CEE). The CEE is developed by well considering the curve’s curvature and torsion based on Taylor series expansion and Frenet frame theory. By utilizing the spherical linear interpolation, the tool orientation and the tool tip position are synchronized with respect to the curve length. A novel dynamic foot point searching procedure is established to weaken the influences of the tracking errors’ magnitude on the CEE precision. To tackle the transmission effect, the GPC is adopted to predict the servo systems’ outputs, and then, the induced tool pose deviations, which are subsequently utilized to counteract the contour errors, are predicted by constructing Jacobian matrixes. Especially, the FBC loops are constructed to suppress the influences of disturbances and further to reduce the magnitudes of contour errors. Simulations and experiments are conducted to verify the effectiveness of the proposed methods.Keywords
Funding Information
- National Natural Science Foundation of China (51975481)
- Sichuan Provincial Science and Technology Support Program (2020YFG0016)
This publication has 25 references indexed in Scilit:
- Newton-ILC Contouring Error Estimation and Coordinated Motion Control for Precision Multiaxis Systems With Comparative ExperimentsIEEE Transactions on Industrial Electronics, 2017
- Linear programming and windowing based feedrate optimization for spline toolpathsCIRP Annals, 2017
- Dual sliding mode contouring control with high accuracy contour error estimation for five-axis CNC machine toolsInternational Journal of Machine Tools and Manufacture, 2016
- Real time parameter based contour error estimation algorithms for free form contour followingInternational Journal of Machine Tools and Manufacture, 2016
- Energy Saving in Five-Axis Machine Tools Using Synchronous and Contouring Control and Verification by Machining ExperimentIEEE Transactions on Industrial Electronics, 2015
- A generalized on-line estimation and control of five-axis contouring errors of CNC machine toolsInternational Journal of Machine Tools and Manufacture, 2015
- Pre-compensation of contour errors in five-axis CNC machine toolsInternational Journal of Machine Tools and Manufacture, 2013
- Real-time contouring error estimation for multi-axis motion systems using the second-order approximationInternational Journal of Machine Tools and Manufacture, 2013
- Improving contouring accuracy by tuning gains for a bi-axial CNC machineInternational Journal of Machine Tools and Manufacture, 2009
- High speed CNC system design. Part II: modeling and identification of feed drivesInternational Journal of Machine Tools and Manufacture, 2001