Initial Testing of Solutions to Redox Problems with Anode-Supported SOFC
Authors:
- 1 January 2006
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (10) , A1929-A1934
Abstract
The most commonly used solid oxide fuel cell (SOFC) anode material is a two phase nickel- and yttria-stabilized zirconia (Ni/YSZ) cermet. During typical fuel cell operation, this material remains a cermet; however, in a commercial SOFC system seal leakage, fuel supply interruption, or other situations may cause the anode to reoxidize. The cyclic reduction and oxidation (redox) of nickel results in large bulk volume changes, which may have a significant effect on the integrity of interfaces within the fuel cell and thus may cause significant performance degradation. Following initial study of the degradation mechanisms and redox kinetics, a number of solutions have been devised. These can be broadly categorized into system solutions and unit cell or materials solutions. The former includes purge gas, other means to produce a reducing gas, cell reversal, and passive solutions such as hydrides, oxygen getters, and steam purging. The latter includes alternative anode materials, microstructural modification of anode functional layers (AFLs), graded porosity, and composition of AFL and redox barrier layers. This paper discusses the pros and cons of each approach and some initial feasibility testing in short-stack repeat units.Keywords
This publication has 8 references indexed in Scilit:
- Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodesSolid State Ionics, 2005
- The Status of SOFC Development at Versa Power SystemsECS Proceedings Volumes, 2005
- Initial Testing of Solutions to Redox Problems with Anode-Supported Solid Oxide Fuel CellsECS Proceedings Volumes, 2005
- Enhancing the Redox Tolerance of Anode Supported Solid Oxide Fuel Cells by Microstructural ModificationECS Proceedings Volumes, 2005
- Synthesis and Characterization of (La[sub 0.75]Sr[sub 0.25])Cr[sub 0.5]Mn[sub 0.5]O[sub 3−δ], a Redox-Stable, Efficient Perovskite Anode for SOFCsJournal of the Electrochemical Society, 2004
- Kinetics of oxidation and reduction of Ni/YSZ cermetsIonics, 2003
- Development of a multilayer anode for solid oxide fuel cellsSolid State Ionics, 2002
- Evaluation of yttrium-doped SrTiO3 as an anode for solid oxide fuel cellsJournal of the European Ceramic Society, 2002