Fabrication process for FEP piezoelectrets based on photolithographically structured thermoforming templates
Open Access
- 12 December 2022
- journal article
- research article
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (1) , 191-203
Abstract
Piezoelectrets fabricated from fluoroethylenepropylene (FEP)-foils have shown drastic increase of their piezoelectric properties during the last decade. This led to the development of FEP-based energy harvesters, which are about to evolve into a technology with a power-generation-capacity of milliwatt per square-centimeter at their resonance frequency. Recent studies focus on piezoelectrets with solely negative charges, as they have a better charge stability and a better suitability for implementation in rising technologies, like the internet of things (IOT) or portable electronics. With these developments heading towards applications of piezoelectrets in the near future, there is an urgent need to also address the fabrication process in terms of scalability, reproducibility and miniaturization. In this study, we firstly present a comprehensive review of the literature for a deep insight into the research that has been done in the field of FEP-based piezoelectrets. For the first time, we propose the employment of microsystem-technology and present a process for the fabrication of thermoformed FEP piezoelectrets based on thermoforming SU-8 templates. Following this process, unipolar piezoelectrets were fabricated with air void dimensions in the range of 300–1000 $$\upmu \text {m}$$ in width and approx. 90 $$\upmu \text {m}$$ in height. For samples with a void size of 1000 $$\upmu \text {m}$$ , a $$d_{33}$$ -coefficient up to 26,508 pC/N has been achieved, depending on the applied seismic mass. Finally, the properties as energy harvester were characterized. At the best, an electrical power output of 0.51 mW was achieved for an acceleration of 1 $$\times$$ g with a seismic mass of 101 g. Such piezoelectrets with highly defined dimensions show good energy output in relation to volume, with high potential for widespread applications.
Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (3FH003PX5)
- Zentrum für Wisschenschaftliche Services und Transfer
- Technische Hochschule Aschaffenburg
This publication has 45 references indexed in Scilit:
- Fluoroethylenepropylene ferroelectrets with patterned microstructure and high, thermally stable piezoelectricityApplied Physics A, 2012
- Dielectric elastomer and ferroelectret films combined in a single device: how do they reinforce each other?Applied Physics A, 2012
- Piezoelectric performance of fluor polymer sandwiches with different void structuresApplied Physics A, 2012
- Piezoelectricd33coefficients in foamed and layered polymer piezoelectrets from dynamic mechano-electrical experiments, electro-mechanical resonance spectroscopy and acoustic-transducer measurementsMeasurement Science and Technology, 2012
- Polarization and piezoelectricity in polymer films with artificial void structureApplied Physics A, 2011
- Polarization and Properties of Laminated Fluoropolymer FilmsMaterials Science Forum, 2011
- Performance of Piezoelectrets Made of Non-Porous Polytetrafluoroethylene and Fluoroethylenepropylene LayersMaterials Science Forum, 2011
- Processing and Properties of PTFE-FEP-PTFE Ferroelectret FilmsFerroelectrics, 2011
- Thermally stable fluorocarbon ferroelectrets with high piezoelectric coefficientApplied Physics A, 2006
- Adhesion studies of metals on fluorocarbon polymer filmsJournal of Vacuum Science & Technology A, 1990