Materials for guitar back plates made from sustainable forest resources
- 1 February 1997
- journal article
- conference paper
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 101 (2) , 1112-1119
Abstract
A new type of wood-based material for guitar back plates as a substitute for Brazilian rosewood was produced based on Japanese cedar logs with a small diameter, of which the utilization is limited despite its availability. The sapwood portion of logs with a diameter of 20 cm was processed to veneers of 2 mm thickness using a rotary lathing machine. The veneers were impregnated with a low-molecular-weight phenolic resin, laminated in parallel, and compressed perpendicular to their plane. When the veneers were treated with a 3% or 5% aqueous solution and compressed to a density of 0.8 without adhesives, the specific dynamic Young’s modulus (E/γ, ratio of stiffness to specific gravity) and tan δ (damping) of the materials became almost the same as those of Brazilian rosewood in the lower-frequency range, not only in the longitudinal direction but also across the longitudinal direction. However, the frequency dependencies of the specific Young’s modulus and tan δ of the materials differed from those of Brazilian rosewood, which may be partially related to the higher values of E/G of laminated compressed wood as a result of the increased density induced by deformation of the cell walls.Keywords
This publication has 5 references indexed in Scilit:
- Chemical treatment of wood for musical instrumentsThe Journal of the Acoustical Society of America, 1994
- The Changes in the Acoustic Properties of Western Red Cedar due to Methanol ExtractionHolzforschung, 1994
- Improvement of the acoustic and hygroscopic properties of wood by a chemical treatment and application to the violin partsThe Journal of the Acoustical Society of America, 1992
- Acoustic Properties of Wood for the Top Plate of GuitarJournal of the Society of Materials Science, Japan, 1990
- The influence of shear and rotatory inertia on the free flexural vibration of wooden beamsBritish Journal of Applied Physics, 1958