Application of Taguchi Method and Anova Techniques to Maximize HVOF Spraying to WC-12Co
Authors:
- 1 July 2020
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 854, 109-116
Abstract
The purpose of this study was to achieve a low-porosity HVOF (High velocity Oxygen Fuel) spray cover and to determine the effect of spray parameters on the porosity of the coating. The spray parameters studied include: Powder feed rate (A); Spray distance (B); Oxygen/Propane ratio to porosity of WC-12Co coating on 16Mn steel. Taguchi method and ANOVA (Analysis of variance) technique were used to optimize and analyze the effect of spray parameters. The results showed that the optimum spray parameters with A = 26 g/min, B = 0.2m, C = 5 for porosity smallest. Factor A has the greatest influence on porosity, followed by B and C. The experimental result is then compared to optimal results and the error is only 4.2 %. Hence, one can say that the optimal results are reliable and Taguchi method - ANOVA technique proved to be an effective solution to the optimization problem. Parameters for a WC-12Co coating with improved porosity on 16Mn steel substrate have been identified.Keywords
This publication has 8 references indexed in Scilit:
- FEATURES OF ELEMENTARY BURST FORMATION DURING CUTTING COALS AND ISOTROPIC MATERIALS WITH REFERENCE CUTTING TOOL OF MINING MACHINESJournal of Mining Institute, 2019
- Rescue complex for coal minesIOP Conference Series: Earth and Environmental Science, 2017
- Optimization of Plasma Spray Process VIA Orthogonal Test Design Method, SVM, and Improved PSOInternational Journal of Materials, Mechanics and Manufacturing, 2017
- Identifying the optimal HVOF spray parameters to attain minimum porosity and maximum hardness in iron based amorphous metallic coatingsDefence Technology, 2017
- Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel EngineMathematical Problems in Engineering, 2014
- Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial ReviewJournal of Thermal Spray Technology, 2009
- Genetic Algorithm for Parameters Optimization of ANN-based Speed Controller2007
- HVOF-Sprayed Alloy In718 – The Influence of Process Parameters on the Microstructure and Mechanical Properties1997