Influence of Microstructure on Tensile Properties and Fatigue Crack Propagation Behavior for Lath Martensitic Steel
Open Access
Abstract
This paper addresses the role of multilevel microstructures on the fatigue crack propagation behavior and the tensile properties of lath martensite with different substructure sizes. Microstructure characterization of the alloy was carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron back-scattering diffraction (EBSD), and optical microscopy (OM). Based on the classic Hall–Petch relationship, the results of tensile tests showed that martensitic block is the effective control unit of yield strength. Furthermore, the plasticity of lath martensite is not sensitive to grain size. The tensile deformation mechanisms were also discussed. Fatigue crack propagation tests revealed that the coarse grain has a higher crack propagation threshold and lower crack propagation rate than the fine grain in lath martensitic steel. The change in the plasticity zone ahead of the crack tip leads to the transitional behavior of the fatigue crack propagation rate. When plasticity zone sizes are equal to the block size, the fatigue crack propagation reverts to a stable propagation stage. Finally, an empirical model was established to predict the fatigue crack propagation rate of the stable propagation stage based on the tensile properties of the lath martensitic steel.Keywords
Funding Information
- the Natural Science Foundation of Guizhou Province ([2020]1Z046, ZK[2022] 023, [2020]1Y199)
This publication has 30 references indexed in Scilit:
- Effect of martensitic morphology on mechanical properties of an as-quenched and tempered 25CrMo48V steelMaterials Science and Engineering: A, 2012
- Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending testMaterials Science and Engineering: A, 2010
- Crystallographic features of lath martensite in low-carbon steelActa Materialia, 2006
- Quantitative Evaluation of Fracture Toughness-Microstructural Relationships in Alpha-Beta Titanium AlloysJournal of Materials Engineering and Performance, 2004
- The morphology and crystallography of lath martensite in Fe-C alloysActa Materialia, 2003
- On an unified model for predicting notch strength and fracture toughness of metalsEngineering Fracture Mechanics, 1989
- Influence of polycrystal grain size on fracture toughness of and fatigue threshold in Armco ironEngineering Fracture Mechanics, 1987
- A CALCULATION OF THE THRESHOLD STRESS INTENSITY RANGE FOR FATIGUE CRACK PROPAGATION IN METALSFatigue & Fracture of Engineering Materials & Structures, 1980
- The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct C alloyMetallurgical Transactions A, 1976
- The dependence of fatigue crack growth rate on grain sizeMetallurgical Transactions, 1973