Design Techniques for Single-Ended Wireline Crosstalk Cancellation Receiver Up To 112 Gb/s
Open Access
- 19 November 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. 4, 318-327
Abstract
The increasing demand for bandwidth in data centers is driving the advancement of wireline receivers to support higher data rates, even up to 224 Gb/s. A single-ended scheme, which utilizes two single-ended signals on a pair of differential channels, offers a promising solution for achieving this goal. This approach effectively doubles the data throughput of the links and reduces the bandwidth requirements for both active and passive components. However, this scheme suffers from severe crosstalk, especially far-end crosstalk (FEXT). At higher data rates, single-ended crosstalk cancellation interfaces encounter several issues. Firstly, FEXT noise becomes more pronounced at higher frequencies. Additionally, the increased bandwidth demands lead to higher power consumption. Finally, as frequency increases, the channel exhibits severe insertion loss, intensifying the equalization burden on receivers. This paper introduces several techniques that enable single-ended crosstalk cancellation receivers to achieve data rates of up to 56 and 112 Gb/s per lane using four-level pulse amplitude modulation (PAM-4) in 28-nm CMOS technology. These 56 Gb/s and 112 Gb/s receivers achieve a bit error rate of <10-10 and <10-12 with a single-ended channel loss of 24 and 25 dB, respectively.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB2803303)
- National Natural Science Foundation of China (62074074)
- Science and Technology Plan of Shenzhen (KJZD20231023100159002)
This publication has 28 references indexed in Scilit:
- 7.1 A 2.69pJ/b 212Gb/s DSP-Based PAM-4 Transceiver for Optical Direct-Detect Application in 5nm FinFET2024
- 13.5 A 64Gb/s/pin PAM4 Single-Ended Transmitter with a Merged Pre-Emphasis Capacitive-Peaking Crosstalk-Cancellation Scheme for Memory Interfaces in 28nm CMOS2024
- A $2\times 50\ \text{Gb}/\mathrm{s}$ Single-Ended MIMO PAM-4 Crosstalk Cancellation and Signal Reutilization Receiver in 28 nm CMOS2022
- Optimal PAM Order for Wireline Communication2021
- 11.3 A 480Gb/s/mm 1.7pJ/b Short-Reach Wireline Transceiver Using Single-Ended NRZ for Die-to-Die Applications2021
- 8.1 A 224Gb/s DAC-Based PAM-4 Transmitter with 8-Tap FFE in 10nm CMOS2021
- 6.7 An 8Gb/s/µm FFE-Combined Crosstalk-Cancellation Scheme for HBM on Silicon Interposer with 3D-Staggered Channels2020
- 10 Gb/s adaptive receive-side merged near-end and far-end crosstalk cancellation circuitry in 65 nm CMOSAnalog Integrated Circuits and Signal Processing, 2016
- FEXT Crosstalk Cancellation for High-Speed Serial Link Design2006
- Forward crosstalk compensation on bus linesIEEE Transactions on Circuits and Systems I: Regular Papers, 1993