Failure of Pressurized Corroded Pipeline Subject to Axial Compression: A Parametric Study
Authors:
- 24 May 2013
- journal article
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 135 (3) , 031402
Abstract
Onshore buried steel pipelines are used for transporting oil and gas to various cities and locations. These pipelines can be subjected to various loading, such as axial, bending, shear, and other complex loading from the geotechnical movements and temperature variations. For example, a buried pipeline situated on an unstable slope can be subjected to axial load and axial deformation. In addition, this pipe experiences pressure loading from the fluids that it transports. The buried pipelines also need to endure corrosive environmental and as a result, corrosion occurs in these pipelines. Corrosion is the primary cause for structural failure of buried oil and gas pipelines and corrosion may lead to a catastrophic rupture failure causing environmental damage, injuries to human and animals, and loss of production and revenue. Hence, understanding the structural behavior and failure conditions of corroded pipelines is important for the pipeline operators. Therefore, this project was undertaken to determine the conditions required for failures of corroded steel pipes when subjected to axial deformation and internal pressures. Then the effect of internal pressure, dimensions of the corrosion, and depth of corrosion on the failure condition and failure mode was studied. It was found that the increasing value of these parameters is beneficial for achieving a favorable failure mode, however it can reduce the axial load carrying capacity significantly.Keywords
This publication has 7 references indexed in Scilit:
- Landslide-related ruptures of the Camisea pipeline system, PeruQuarterly Journal of Engineering Geology and Hydrogeology, 2009
- Behavior of wrinkled steel pipelines subjected to cyclic axial loadingsCanadian Journal of Civil Engineering, 2007
- Performance evaluation of a buried steel pipe in a moving slope: a case studyCanadian Geotechnical Journal, 2004
- An Experimental Study on the Evaluation of Failure Behavior of Pipe With Local Wall Thinning2002
- Instability of Pipelines on SlopesJournal of Applied Mechanics, 1999
- NPS 8 Geopig: Inertial Measurement and Mechanical Caliper Technology1998
- An upper-bound approach to static stress analysis of pipelinesInternational Journal of Pressure Vessels and Piping, 1995