Evaluation of ASTM D6424 standard for knock analysis using unleaded fuel candidates on a six cylinder aircraft engine
Open Access
- 8 April 2021
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 23 (7) , 1159-1179
Abstract
The ASTM D6424 standard is used for general aviation piston engine knock detection and is tested for unleaded fuel candidates. Issues are discussed regarding the identification of knocking cycles, filtering frequency bands, and the effects of down-sampling for this knock detection technique. The knock tests were performed on the Continental TSIO-520-VB engine at 12,000 ft for take-off and cruise conditions using three different fuels, the standard leaded 100LL avgas and two unleaded fuel candidates. The ASTM D6424 knock detection method has its own particular disadvantages, which are detailed and compared to other knock detection methods including the third derivative of pressure signal and discrete wavelet transform. Updates to the standard include a minimum sampling rate of 0.2 CAD. Additionally, the current standard does not contain recommendations for filtering the cylinder pressure which results in over detection of knocking cycles with the two new aviation fuel candidates tested. Recommendations are provided regarding the pressure signal processing prior to ASTM D6424 knock-characterization.Keywords
Funding Information
- National Research Council (NRC) of Canada
- Transport Canada
- Mitacs (IT08540)
- Canadian Owners and Pilots Association
- Environment and Climate Change Canada
This publication has 61 references indexed in Scilit:
- Autoignition prediction capability of the Livengood–Wu correlation applied to fuels of commercial interestInternational Journal of Engine Research, 2014
- The use of dynamic adaptive chemistry and tabulation in reactive flow simulationsCombustion and Flame, 2014
- Modern Methods in Engine Knock Signal DetectionProcedia Technology, 2013
- Dynamic knock detection and quantification in a spark ignition engine by means of a pressure based methodEnergy Conversion and Management, 2012
- Combustion simulations of the fuels for advanced combustion engines in a homogeneous charge compression ignition engineInternational Journal of Engine Research, 2012
- Development and evaluation of an air quality modeling approach to assess near-field impacts of lead emissions from piston-engine aircraft operating on leaded aviation gasolineAtmospheric Environment, 2011
- A Zero-Dimensional Combustion Model with Reduced Kinetics for SI Engine Knock SimulationCombustion Science and Technology, 2009
- Investigation of the detection of knock and misfire of a spark ignition engine with the ionic current methodProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2003
- Estimation of cycle-resolved in-cylinder pressure and air-fuel ratio using spark plug ionization current sensingInternational Journal of Engine Research, 2001
- A theory for multiresolution signal decomposition: the wavelet representationIEEE Transactions on Pattern Analysis and Machine Intelligence, 1989