Bending Properties of Pleated Wood Thermally Treated at 160 °C and 200 °C Temperatures
Open Access
Abstract
This study investigates the combined effects of compression along the grain by 20% after steaming (pleating), and thermal treatment on the mechanical and physical properties of beech (Fagus sylvatica L.) and sessile oak (Quercus petraea (Matt.) Liebl.). Pleating significantly increased plasticity and maximum deflection, reaching 339% of untreated values in beech and 337% in oak. However, it reduced bending strength and modulus of elasticity to about 50%. Keeping the specimen compressed for 5 h (fixation) during the thermo-hydro-mechanical modification process of pleating further decreased the modulus of elasticity to 26%–29% of untreated levels. Thermal treatment at 160 °C increased bending strength of fixated specimens to 120.5% in beech and 125.3% in oak, partially restoring strength, while at 200 °C, it decreased drastically to 26.7% and 21.5%, respectively. Density was reduced by thermal treatment, with oven-dry values decreasing by 6.2% (beech) and 12.7% (oak) at 160 °C, and by 18.2% and 25.1% at 200 °C. The results indicate that high-temperature treatment (200 °C) leads to wood with brittle properties.Keywords
Funding Information
- Magyar Tudományos Akadémia (BO/00872/23)
This publication has 32 references indexed in Scilit:
- Effects of thermal modification on the flexure properties, fracture energy, and hardness of western hemlockWood Science and Technology, 2023
- Thermal modification of wood—a review: chemical changes and hygroscopicityJournal of Materials Science, 2021
- FTIR analysis of chemical changes in wood induced by steaming and longitudinal compressionCellulose, 2020
- Moisture-dependent mechanical properties of longitudinally compressed woodEuropean Journal of Wood and Wood Products, 2019
- The effect of chemical changes during thermal modification of European oak and Norway spruce on elasticity propertiesComposite Structures, 2019
- Impact of thermal modification on the chemical changes and impact bending strength of European oak and Norway spruce woodComposite Structures, 2019
- Micromechanical properties of longitudinally compressed woodEuropean Journal of Wood and Wood Products, 2019
- Investigations on the physical and mechanical behaviour of sycamore maple (Acer pseudoplatanus L.)European Journal of Wood and Wood Products, 2012
- Hygroscopicity of heat-treated Norway spruce (Picea abies) woodEuropean Journal of Wood and Wood Products, 2009
- Microstructure and fracture mechanical response of woodInternational Journal of Fracture, 2006