Highly Ordered TiO2 Nanotube Electrodes for Efficient Quasi-Solid-State Dye-Sensitized Solar Cells
Open Access
Abstract
Free-standing TiO2 nanotube (NT) electrodes have attracted much attention for application in solid- or quasi-solid-state dye-sensitized solar cells (DSSCs) because of their suitable pore structure for the infiltration of solid electrolytes. However, few studies have been performed on the relationship between nanostructures of these NT electrodes and the photovoltaic properties of the solid- or quasi-solid-state DSSCs. Here, we prepare vertically aligned and highly ordered TiO2 NT electrodes via a two-step anodization method for application in quasi-solid-state DSSCs that employs a polymer gel electrolyte. The length of NT arrays is controlled in the range of 10–42 μm by varying the anodization time, and the correlation between NT length and the photovoltaic properties of quasi-solid-state DSSCs is investigated. As the NT length increases, the roughness factor of the electrode is enlarged, leading to the higher dye-loading; however, photovoltage is gradually decreased, resulting in an optimized conversion efficiency at the NT length of 18.5 μm. Electrochemical impedance spectroscopy (EIS) analysis reveals that the decrease in photovoltage for longer NT arrays is mainly attributed to the increased electron recombination rate with redox couples in the polymer gel electrolyte.Keywords
Funding Information
- Dankook University (2019)
This publication has 44 references indexed in Scilit:
- Ruthenium (Ru) Doped Titanium Dioxide (P25) Electrode for Dye Sensitized Solar CellsEnergies, 2020
- Phenanthrene‐Fused‐Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper‐Electrolyte‐Based Dye‐Sensitized Solar CellsAngewandte Chemie International Edition, 2020
- Indoor-light-energy-harvesting dye-sensitized photo-rechargeable batteryEnergy & Environmental Science, 2019
- Dye-Sensitized Solar Cells Using Aluminum-Doped Zinc Oxide/Titanium Dioxide Photoanodes in ParallelEnergies, 2019
- Design‐to‐Device Approach Affords Panchromatic Co‐Sensitized Solar CellsAdvanced Energy Materials, 2018
- Completely Transparent Conducting Oxide-Free and Flexible Dye-Sensitized Solar Cells Fabricated on Plastic SubstratesACS Nano, 2015
- Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide PerovskitesScience, 2012
- Dye-Sensitized Solar CellsChemical Reviews, 2010
- Preparation of Highly Ordered Mesoporous Al2O3/TiO2 and Its Application in Dye-Sensitized Solar CellsLangmuir, 2009
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 filmsNature, 1991