Behavior of composite structures orientations towards their failure and damage
Authors:
- 23 January 2015
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 49 (29) , 3703-3711
Abstract
In this paper, carbon/epoxy composites were employed as a potential candidate for spacecraft structural shielding along with the new concept of geometric configurations according to the threat severity to maximize the impactor energy absorption to improve performance. Carbon/epoxy composites of quasi-isotropic 16 layers [0/ ± 45/90]2s were manufactured using an autoclave, and the specimens were exposed to a low Earth orbit environment, which produced an average total mass loss of 0.42%, mainly due to outgassing. Al2017-T4 spherical projectiles with a diameter of 5.56 mm weight of 0.25 g were used as the impactor in the velocity range of 1500 ± 500 m/s. Earlier experimentations showed the superiority of obliquity towards energy absorption for single bumpers. Double bumpers with one 45° obliquity at 100 mm standoff absorbed 14% more specific energy than double bumpers with one at 30°; both of them were found to be superior to normal–normal bumpers by 40% and 30% on average, respectively. By CSCAN, it was also found that oblique impact on the first bumper resulted in less damage on the rear bumper and resulted in the superiority of the proposed geometric configurations, which enabled enhanced protection and designs according to threat severity.Keywords
This publication has 17 references indexed in Scilit:
- Improvement of tensile properties of CFRP composites under LEO space environment by applying MWNTs and thin-plyComposites Part A: Applied Science and Manufacturing, 2011
- Low earth orbit space environment simulation and its effects on graphite/epoxy compositesComposite Structures, 2006
- Impact perforation behavior of CFRPs using high-velocity steel sphereInternational Journal of Impact Engineering, 2002
- Hole size and crack length models for spacecraft walls under oblique hypervelocity projectile impactAerospace Science and Technology, 1999
- Debris clouds behind double-layer targetsInternational Journal of Impact Engineering, 1997
- Degradation of multiply polymer-matrix composites induced by space environmentComposites, 1994
- Mesh double-bumper shield: A low-weight alternative for spacecraft meteoroid and orbital debris protectionInternational Journal of Impact Engineering, 1993
- Highy oblique impacts into thick and thin targetsInternational Journal of Impact Engineering, 1993
- Design and performance equations for advanced meteoroid and debris shieldsInternational Journal of Impact Engineering, 1993
- Studies on the impact resistance of composite platesComposites, 1973