Effects of the microstructure and surface hardness of 316 L stainless steel printed by laser powder bed fusion interacting with a methane gas burner
Authors:
- 13 March 2026
- journal article
- research article
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 44 (3) , 193-211
Abstract
The manufacturing of high-temperature environment parts (combustion chambers, turbojet or rocket injectors) with the Laser Power Bed Fusion (LPBF) process is very promising due to the freedom on geometries it provides. In order to gain a better understanding on a realistic flame–wall interactions, 316 L steel plates from LPBF and cast /forged processes were subjected to a reacting flow using robust cross-disciplinary methodology. The physical phenomena (thermal, physico-chemical and mechanical) involved in structural parts (full-scale) subjected to combustion-based burnt gases is studied via the use of a laboratory-scale combustion test rig. The generation of a methane-air flow enables to conduct a comparative analysis to understand the influence of a well-controlled thermal stress (1200°C, 1 h) on the material properties (hardness, residual stresses), depending on the manufacturing process and microstructure evolution during the thermal exposure. Results highlights that the interaction between the flame burnt gases and the material does not affect the microstructure and mechanical behaviour for cast whereas localized recrystallization in the range of 0–10 μm near the exposed surface and residual stress state modifications are revealed for LPBF. This is the first study on flame–LPBF alloy interactions.Keywords
This publication has 30 references indexed in Scilit:
- Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogenInternational Journal of Hydrogen Energy, 2024
- On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatmentsCorrosion Science, 2022
- Development of energy intensive multifunction cavitation technology and its application to the surface modification of the Ni-based columnar crystal superalloy CM186LCHeliyon, 2021
- Towards the Optimization of Post-Laser Powder Bed Fusion Stress-Relieve Treatments of Stainless Steel 316LMetallurgical and Materials Transactions A, 2021
- Microstructure and high temperature tensile properties of 316L fabricated by laser powder-bed fusionAdditive Manufacturing, 2021
- Fabrication and Thermal Structural Characteristics of Ultra-high Temperature Ceramic Struts in ScramjetsJournal of Wuhan University of Technology-Mater. Sci. Ed., 2018
- Hydrogen storage: Recent improvements and industrial perspectivesInternational Journal of Hydrogen Energy, 2017
- Radical quenching of metal wall surface in a methane-air premixed flameCombustion and Flame, 2015
- Optical convective heat transfer measurements using infrared thermography and frequency domain phosphor thermometryInternational Journal of Heat and Mass Transfer, 2015
- Multiscale Thermal Characterization of Mechanically Loaded Ceramic Matrix CompositeExperimental Mechanics, 2015