Effect of Airgap Length on Electromagnetic Performance of Surface Mounted Permanent Magnet Vemier Machine
Authors:
- 23 August 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1882-1888
Abstract
This paper investigates the effect of airgap length on the electromagnetic performance of 3kW surface mounted permanent magnet Vernier (SPM-V) machine. The performance is compared with a conventional surface mounted permanent magnet (SPM) machine with same airgap length using 2D Finite Element Analysis (2D FEA). For each airgap length, the slot/pole number combination for the SPM-V machine is investigated to achieve the optimal performance compared to the conventional SPM machine. The results show that the SPMV machine can achieve much higher torque capability than the conventional SPM machine at smaller airgap length. However, there is an optimal airgap length beyond which the torque performance of SPM-V machines drops below the conventional SPM counterparts. Moreover, unlike the conventional SPM machines, the power factor of SPM-V machines drops significantly with increase in airgap length.Keywords
This publication has 23 references indexed in Scilit:
- Analysis of Torque Capability and Quality in Vernier Permanent-Magnet MachinesIEEE Transactions on Industry Applications, 2015
- Influence of Pole Ratio and Winding Pole Numbers on Performance and Optimal Design Parameters of Surface Permanent-Magnet Vernier MachinesIEEE Transactions on Industry Applications, 2015
- Novel Fault-Tolerant Design of Axial Field Flux-Switching Permanent Magnet MachineIEEE Transactions on Applied Superconductivity, 2014
- Ironless Permanent-Magnet Generators for Offshore Wind TurbinesIEEE Transactions on Industry Applications, 2013
- High-power Generators for Offshore Wind TurbinesEnergy Procedia, 2013
- The expanding role of PM machines in direct-drive applications2011
- A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power GenerationIEEE Transactions on Industry Applications, 2009
- PM Wind Generator TopologiesIEEE Transactions on Industry Applications, 2005
- Influence of design parameters on cogging torque in permanent magnet machinesIEEE Transactions on Energy Conversion, 2000
- Generic torque-maximizing design methodology of surface permanent-magnet vernier machineIEEE Transactions on Industry Applications, 2000