Single-Stage Single-Phase High-Step-Up ZVT Boost Converter for Fuel-Cell Microgrid System
- 27 September 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 25 (12) , 3057-3065
Abstract
In this paper, a voltage multiplier cell is inserted in the conventional boost converter operated in continuous conduction mode (CCM) to provide another design freedom for the voltage-gain extension. Thus, the voltage conversion ratio is enlarged and the narrow turn-OFF period is avoided in the high step-up applications. Furthermore, the voltage multiplier cell makes the voltage stress of all the power devices lower than the high output voltage. As a result, the low-voltage-rated power devices can be employed to reduce the conduction losses and to improve the power device reliability. Moreover, zero-voltage switching soft-switching operation is achieved for the power MOSFETs in the whole-switching transition. Zero-current switching turn-OFF condition is provided for the diodes. Therefore, the power device switching losses and the diode reverse-recovery losses are minimized greatly. In addition, the input current ripple is reduced due to the CCM operation compared with most of the published single-stage single-phase high step-up converters, which makes it more advantageous in the hybrid electric vehicles and the fuel-cell power conversion systems. Finally, the experimental results from a 500-W, 36-380-V prototype are provided to validate the effectiveness of the proposed converter.Keywords
This publication has 24 references indexed in Scilit:
- Soft-Switched CCM Boost Converters With High Voltage Gain for High-Power ApplicationsIEEE Transactions on Power Electronics, 2010
- A Multiphase, Modular, Bidirectional, Triple-Voltage DC–DC Converter for Hybrid and Fuel Cell Vehicle Power SystemsIEEE Transactions on Power Electronics, 2008
- A Family of Single-Switch PWM Converters With High Step-Up Conversion RatioIEEE Transactions on Circuits and Systems I: Regular Papers, 2008
- Voltage Multiplier Cells Applied to Non-Isolated DC–DC ConvertersIEEE Transactions on Power Electronics, 2008
- High Conversion Ratio DC–DC Converters With Reduced Switch StressIEEE Transactions on Circuits and Systems I: Regular Papers, 2008
- Boost Converter With Coupled Inductors and Buck–Boost Type of Active ClampIEEE Transactions on Industrial Electronics, 2008
- Distributed Intelligent Energy Management System for a Single-Phase High-Frequency AC MicrogridIEEE Transactions on Industrial Electronics, 2007
- Novel high-efficiency step-up converterIEE Proceedings - Electric Power Applications, 2004
- High-efficiency, high step-up DC-DC convertersIEEE Transactions on Power Electronics, 2003
- Fundamentals of Power Electronics2001