A Low-Noise CMOS SPAD Pixel With 12.1 Ps SPTR and 3 Ns Dead Time
Top Cited Papers
Open Access
- 10 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 28 (2: Optical) , 1-9
Abstract
Single-photon avalanche diodes (SPADs) have become the sensor of choice in many applications whenever high sensitivity, low noise, and sharp timing performance are required, simultaneously. Recently, SPADs designed in CMOS technology, have yielded moderately good performance in these parameters, but never equaling their counterparts fabricated in highly customized, non-standard technologies. The arguments in favor of CMOS-compatible SPADs were miniaturization, cost and scalability. In this paper, we present the first CMOS SPAD with performance comparable or better than that of the best custom SPADs, to date. The SPAD-based design, fully integrated in 180 nm CMOS technology, achieves a peak photon detection probability (PDP) of 55% at 480 nm with a very broad spectrum spanning from near ultraviolet (NUV) to near infrared (NIR) and a normalized dark count rate (DCR) of 0.2 cps/ $\mu$ m $^2$ , both at 6 V of excess bias. Thanks to a dedicated CMOS pixel circuit front-end, an afterpulsing probability of about 0.1% at a dead time of $\sim$ 3 ns were achieved. We designed three SPADs with a diameter of 25, 50, and 100 $\mu$ m to study the impact of size on the timing jitter and to create a scaling law for SPADs. For these SPADs, a single-photon time resolution (SPTR) of 12.1 ps, 16 ps, and 27 ps (FWHM) was achieved at 6 V of excess bias, respectively. The SPADs operate in a wide range of temperatures, from −65 $^{\circ }$ C to 40 $^{\circ }$ C, reaching a normalized DCR of 1.6 mcps/ $\mu$ m $^2$ at 6 V of excess bias for the 25 $\mu$ m at −65 $^{\circ }$ C. The proposed SPADs are ideal for a wide range of applications, including (quantum) LiDAR, super-resolution microscopy, quantum random number generators, quantum key distribution, fluorescence lifetime imaging, time-resolved Raman spectroscopy, to name a few. All these applications can take advantage of the vastly improved performance of our detectors, while enjoying the opportunities of megapixel resolutions promised by the economy of scale that is offered by CMOS technologies.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (200 021-169 465, CRSII5-177 165)
This publication has 43 references indexed in Scilit:
- Time-gated single-photon detection module with 110 ps transition time and up to 80 MHz repetition rateReview of Scientific Instruments, 2014
- Silicon Photon-Counting Avalanche Diodes for Single-Molecule Fluorescence SpectroscopyIEEE Journal of Selected Topics in Quantum Electronics, 2014
- Tunable CMOS Delay Gate With Improved Matching PropertiesIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- A Substrate Isolated CMOS SPAD Enabling Wide Spectral Response and Low Electrical CrosstalkIEEE Journal of Selected Topics in Quantum Electronics, 2014
- CMOS SPADs with up to 500 μm diameter and 55% detection efficiency at 420 nmJournal of Modern Optics, 2014
- New silicon SPAD technology for enhanced red-sensitivity, high-resolution timing and system integrationJournal of Modern Optics, 2012
- Single photon detector fabricated in a complementary metal–oxide–semiconductor high-voltage technologyReview of Scientific Instruments, 2003
- Avalanche detector with ultraclean response for time-resolved photon countingIEEE Journal of Quantum Electronics, 1998
- 20-ps timing resolution with single-photon avalanche diodesReview of Scientific Instruments, 1989
- New silicon epitaxial avalanche diode for single-photon timing at room temperatureElectronics Letters, 1988