Inductive Power Transfer Systems With Digital Switch-Controlled Capacitor for Maximum Efficiency Point Tracking
- 10 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (10) , 9467-9480
Abstract
Usually, the inductance of transmitter coil is sensitive to misalignments of the magnetic coupler when the asymmetrical coil structure with a smaller size receiver coil is adopted. The fluctuation of the inductance of transmitter coil will increase the power losses in the primary inverter. To compensate the fluctuation of the transmitter coil inductance, a digital switch-controlled capacitor (D-SCC) for maximum efficiency point tracking (MEPT) of LCC-S compensated IPT system is proposed. Consequently, the proposed LCC-S compensated IPT system can achieve high efficiency against the fluctuation of transmitter coil inductance. In traditional switch-controlled capacitor, high- frequency current sensor is required for the synchroniza- tion between the transmitter coil current and the driver signals of the switch-controlled capacitor. Nevertheless, the drive signals of D-SCC can be generated directly by the DSP controller in the primary side without detecting zero-cross points of the transmitter coil current, which can improve the system reliability and reduce the cost. Furthermore, the MEPT based on D-SCC is easy to be implemented because only the input dc current measure- ment is required. A 3.3-kW prototype is presented to verify the validity of the proposed D-SCC based MEPT.Keywords
Funding Information
- National Natural Science Foundation of China (51777176, 61733015)
This publication has 33 references indexed in Scilit:
- Accurate Capacitive Current Balancing in Multistring LED Lighting Systems Based on Switched-Capacitor-Controlled $LCC$ Resonant NetworkIEEE Transactions on Power Electronics, 2016
- Variable Frequency Controller for Inductive Power Transfer in Dynamic ConditionsIEEE Transactions on Power Electronics, 2016
- Design Considerations to Reduce Gap Variation and Misalignment Effects for the Inductive Power Transfer SystemIEEE Transactions on Power Electronics, 2015
- Analysis of Coplanar Intermediate Coil Structures in Inductive Power Transfer SystemsIEEE Transactions on Power Electronics, 2014
- A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power TransferIEEE Transactions on Vehicular Technology, 2014
- An Adaptive Impedance-Matching Network Based on a Novel Capacitor Matrix for Wireless Power TransferIEEE Transactions on Power Electronics, 2014
- Adaptive frequency with power-level tracking system for efficient magnetic resonance wireless power transferElectronics Letters, 2012
- Analysis and Design of a Dimmable Electronic Ballast Controlled by a Switch-Controlled CapacitorIEEE Transactions on Industrial Electronics, 2005
- A variable inductor based tuning method for ICPT pickups2005
- A contactless electrical energy transmission system for portable-telephone battery chargersIEEE Transactions on Industrial Electronics, 2003