Microcalorimetry applications of a surface micromachined bolometer-type thermal probe
Authors:
- 1 November 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 18 (6) , 3600-3603
Abstract
This article describes a surface micromachined scanning thermal probe that uses polyimide as the structural material and an embedded thin film metal resistor as the sensing element. The typical dimensions of a fabricated probe are 350 μm in length, 50 μm in width, and 3–10 μm in thickness. The resistor and the scanning tip are formed by sputter-deposited films of nickel and tungsten, which provide temperature coefficient of resistance of 2963 ppm/K. The probe is used to map surface and subsurface spatial variations in the thermal conductivity of a test sample. It is also used as a spatially localized microcalorimeter to measure the glass transition temperature of photoresists: the values obtained for Shipley 1813 and UV6 are 118±1 °C and 137±1 °C, respectively. These are in close agreement with results obtained by other methods that utilize larger samples.Keywords
This publication has 12 references indexed in Scilit:
- Photoresist and the photoresist/wafer interface with a local thermal probe1998
- Nanoscale Temperature Distributions Measured by Scanning Joule Expansion MicroscopyJournal of Heat Transfer, 1998
- Micromachined fabrication of Si cantilevers with Schottky diodes integrated in the tipApplied Physics A, 1998
- A silicon micromachined scanning thermal profiler with integrated elements for sensing and actuationIEEE Transactions on Electron Devices, 1997
- Sensor nanofabrication, performance, and conduction mechanisms in scanning thermal microscopyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Scanning thermal microscopy: Subsurface imaging, thermal mapping of polymer blends, and localized calorimetryJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Novel Microcantilever for Scanning Thermal Imaging MicroscopyJapanese Journal of Applied Physics, 1996
- Sub-surface imaging by scanning thermal microscopyMeasurement Science and Technology, 1996
- Scanning force microscopy measurements of latent image topography in chemically amplified resistsApplied Physics Letters, 1996
- Scanning thermal profilerApplied Physics Letters, 1986