Low-Flow Critical Heat Flux in Heated Microchannels
Authors:
- 1 March 1999
- journal article
- research article
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 131 (3) , 411-425
Abstract
Critical heat flux (CHF) associated with the flow of subcooled water in heated microchannels is experimentally investigated. Four different channels, all 16 cm in length, are used: two are circular and uniformly heated and have 1.17- and 1.45-mm diameters, and the other two represent flow channels in a microrod bundle with a triangular array and 1.131-mm hydraulic diameter, with one uniformly heated over its entire surface and the other heated only over the surfaces of the surrounding rods. The test section parameter ranges are as follows: 250 to 1000 kg/m2·s mass flux, 344- to 1043-kPa exit pressure, 407- to 1204-kPa inlet pressure, and 49 to 72.5°C inlet temperature. The effect of noncondensables (air) on CHF is also examined by repeating some of the experiments with degassed water and with water saturated with air at test section inlet pressure and temperature.Critical heat flux occurs at very high flow qualities (0.36 and higher) in all the tests and indicates the occurrence of dryout. Further...Keywords
This publication has 17 references indexed in Scilit:
- Evaluation of Subcooled Critical Heat Flux Correlations Using the PU-BTPFL CHF Database for Vertical Upflow of Water in a Uniformly Heated Round TubeNuclear Technology, 1997
- CHF mechanism in flow boiling from a short heated wall—I. Examination of near-wall conditions with the aid of photomicrography and high-speed video imagingInternational Journal of Heat and Mass Transfer, 1993
- The Current Status of Theoretically Based Approaches to the Prediction of the Critical Heat Flux in Flow BoilingNuclear Technology, 1992
- FIDAS: Detailed subchannel analysis code based on the three-fluid and three-field modelNuclear Engineering and Design, 1990
- Analytical Prediction of CHF by FIDAS Code Based on Three-Fluid and Film-Dryout ModelJournal of Nuclear Science and Technology, 1990
- Method of Critical Power Prediction Based on Film Flow Model Coupled with Subchannel AnalysisJournal of Nuclear Science and Technology, 1988
- A Phenomenological Model for Prediction of Critical Heat Flux under Highly Subcooled ConditionsFusion Technology, 1988
- Thermal and Hydrodynamic Phenomena in a Horizontal, Uniformly Heated Steam-Generating PipeJournal of Heat Transfer, 1987
- A Comprehensive Examination of Heat Transfer Correlations Suitable for Reactor Safety Analysis1986
- The calculation of dryout in a rod bundleInternational Journal of Multiphase Flow, 1977