Inelastic seismic response of code‐designed multistorey frame buildings with regular asymmetry
Authors:
- 1 May 1993
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 22 (5) , 431-445
Abstract
Based on an asymmetric multistorey frame building model, this paper investigates the influence of a building's higher vibration modes on its inelastic torsional response and evaluates the adequacy of the provisions of current seismic building codes and the modal analysis procedure in accounting for increased ductility demand in frames situated at or near the stiff edge of such buildings. It is concluded that the influence of higher vibration modes on the response of the upper‐storey columns of stiff‐edge frames increases significantly with the building's fundamental uncoupled lateral period and the magnitude of the stiffness eccentricity. The application of the equivalent static torsional provisions of certain building codes may lead to non‐conservative estimates of the peak ductility demand, particularly for structures with large stiffness eccentricity. In these cases, the critical elements are vulnerable to excessive additional ductility demand and, hence, may be subject to significantly more severe structural damage than in corresponding symmetric buildings. It is found that regularly asymmetric buildings excited well into the inelastic range may not be conservatively designed using linear elastic modal analysis theory. Particular caution is required when applying this method to the design of stiff‐edge frame elements in highly asymmetric structures.Keywords
This publication has 15 references indexed in Scilit:
- A modified static procedure for the design of torsionally unbalanced multistorey frame buildingsEarthquake Engineering & Structural Dynamics, 1993
- Definitions of static eccentricity for design of asymmetric shear buildingsEngineering Structures, 1993
- Inelastic seismic response of code designed single storey asymmetric structuresEngineering Structures, 1992
- Lateral strength distribution specification to limit additional inelastic deformation of torsionally unbalanced structuresEngineering Structures, 1992
- Design of torsionally unbalanced structural systems based on code provisions II: Strength distributionEarthquake Engineering & Structural Dynamics, 1992
- Design of torsionally unbalanced structural systems based on code provisions I: Ductility demandEarthquake Engineering & Structural Dynamics, 1992
- Evaluation of Torsional Provisions in Seismic CodesJournal of Structural Engineering, 1991
- Evaluation of factors influencing the inelastic seismic performance of torsionally asymmetric buildingsEarthquake Engineering & Structural Dynamics, 1991
- Earthquake analysis of a class of torsionally‐coupled buildingsEarthquake Engineering & Structural Dynamics, 1989
- Eccentricity in irregular multistory buildingsCanadian Journal of Civil Engineering, 1986