The Unexpected Role of Benzotriazole in Mitigating Magnesium Alloy Corrosion: A Nucleating Agent for Crystalline Nanostructured Magnesium Hydroxide Film
Open Access
- 15 May 2015
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 162 (8) , C403-C411
Abstract
Benzotriazole (BTA), an effective corrosion inhibitor for Cu or Cu-containing Al alloys, was added to 0.1 M NaCl to study its potential role in suppressing corrosion of the commercial Mg alloy, AMlite. In particular, the impact of pH and BTA concentration was investigated, indicating that BTA was effective at restricting corrosion of AMlite in weakly alkaline NaCl solution, i.e. pH 10.0. The degree of the protection afforded was a function of BTA concentration. The best corrosion inhibition was found in the NaCl containing 15 g/L BTA, however, the mechanism of inhibition was not a classical function, nor related to the inhibition mechanism of BTA for Cu-bearing alloys. Instead it is posited that BTA− anions act as a nucleating agent to stimulate the formation of a dense and highly crystalline Mg(OH)2 surface film with a uniform nano-structure capable of passivating the Mg-alloy, in contrast to say, the insoluble Cu-BTA complex via Cu-N coordination bonds for Cu-alloys. The magnitude of this effect of BTA on Mg corrosion was not anticipated, but effective, with beneficial implications to utilization of Mg alloys as anode materials, where in such cases, when dissolution occurs, the anode can passivate with little change in its potential.Keywords
This publication has 48 references indexed in Scilit:
- Microstructural characterization and corrosion resistance evaluation of nanostructured Al and Al/AlCr coated Mg–Zn–Ce–La alloyJournal of Alloys and Compounds, 2014
- Corrosion of magnesium alloys: the role of alloyingInternational Materials Reviews, 2014
- Fabrication and Electrochemical Corrosion Behavior of PEO Coatings on Strip-Cast AZ31Mg Alloy in 3.5% NaCl SolutionIndustrial & Engineering Chemistry Research, 2014
- Double-layered manganese phosphate conversion coating on magnesium alloy AZ91D: Insights into coating formation, growth and corrosion resistanceSurface and Coatings Technology, 2013
- Corrosion-Resistant Electrochemical Platings on Magnesium Alloys: A State-of-the-Art ReviewCorrosion, 2012
- On the electrodeposition of nickel–zinc alloys from a eutectic-based ionic liquidElectrochimica Acta, 2012
- Review of Corrosion-Resistant Conversion Coatings for Magnesium and Its AlloysCorrosion, 2011
- Acid Pickling Pretreatment and Stannate Conversion Coating Treatment of AZ91D Magnesium AlloyJournal of the Electrochemical Society, 2011
- Electroless Ni–P Deposition on AZ91 D Magnesium Alloy Prepared by Molybdate Chemical Conversion CoatingsJournal of the Electrochemical Society, 2009
- Protective coatings on magnesium and its alloys — a critical reviewJournal of Alloys and Compounds, 2002