A Study on Lap Joint Welding of Thin Plate ASTM F1684 Using Fiber Laser Welding
Open Access
Abstract
The International Maritime Organization (IMO) has developed stricter regulations on emission standards for sulfur oxides, etc., and the demand for Liquefied Natural Gas (LNG) is increasing as an alternative to satisfy these standards. This study relates to fiber laser welding, an approach which offers high-speed welding and low welding deformation for ASTM F1684, which has a low coefficient of thermal expansion (CTE) even in a cryogenic environment. In this study, through three preliminary experiments using 0.25 mm thick Invar, the conditions required to secure sufficient penetration depth and back bead were identified. Through the cross-sectional observation analysis, the welding conditions without defects were identified and the trend of penetration shape according to increasing welding speed was identified. Following a lap joint laser welding experiment under the secured conditions, the mechanical properties were evaluated through the shear strength test and the heat influence range of a fiber laser was identified through the temperature measurement of a welding part. As a result, it was confirmed that the shear strength of the lap joint laser welding part was 86.8% that of the base metal.Keywords
Funding Information
- Korea Institute of Industrial Technology (PEH21035)
This publication has 21 references indexed in Scilit:
- LNG-fuelled container ship sailing on the Arctic Sea: Economic and emission assessmentTransportation Research Part D: Transport and Environment, 2020
- Determinants of ship operators’ options for compliance with IMO 2020Transportation Research Part D: Transport and Environment, 2020
- Tensile and Microstructural Behaviors of Austenitic Stainless Steel GTA Welds for Cryogenic ApplicationJournal of Welding and Joining, 2020
- Prismatic pressure vessel with stiffened-plate structures for fuel storage in LNG-fueled shipOcean Engineering, 2020
- Fracture Characteristics of Cryogenic Steel Using Weibull Stress AnalysisJournal of Welding and Joining, 2019
- Study on the Initial Design of an LNG Fuel Tank using 9 wt.% Nickel Steel for Ships and Performance Evaluation of the Welded JointJournal of Welding and Joining, 2019
- Life Cycle Assessment of LNG Fueled Vessel in Domestic ServicesJournal of Marine Science and Engineering, 2019
- Global impacts of recent IMO regulations on marine fuel oil refining processes and ship emissionsTransportation Research Part D: Transport and Environment, 2019
- Effect of Al and Zn-coated Layer of Scaffolding on Weldability of Cryogenic Material in LNG CarriersJournal of Welding and Joining, 2019
- Eco-friendly selection of ship emissions reduction strategies with emphasis on SOx and NOx emissionsInternational Journal of Naval Architecture and Ocean Engineering, 2014