Mechanical Properties of Steel Fiber –Waste Marble Aggregate Concrete
Authors:
- Waseem H. Al-BaghdadiWAWaseem H. Al-Baghdadi
- Osama M. Al-HussainiOAOsama M. Al-Hussaini
- Fadhl A. Al-AssadyFAFadhl A. Al-Assady
- Qusay A. JabalQJQusay A. Jabal
Open Access
- 1 July 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 888 (1)
Abstract
In this research, the enhancement of compressive, tensile and flexural strength of concrete mixtures was explored using both waste white marble instead of aggregate and steel fibers. White marble was mixed with an ordinary Portland cement replacing the mixture of both coarse and fine aggregate by 10%, 50% and 100% of weight. Besides adding the steel fibres to mixture with a total volume of concrete up to 2%. At the age of 28 days of curing, a significant increase of 24.3%, 34.5% and 38.8% was noticed in compressive, tensile and flexural strengths respectively for the replaced aggregate mixtures. Further improvement was gained by adding the steel fiber.Keywords
This publication has 4 references indexed in Scilit:
- Utilisation of Waste Marble Dust as Fine Aggregate in ConcreteIOP Conference Series: Earth and Environmental Science, 2017
- Properties of Hardened Concrete Produced by Waste Marble PowderProcedia - Social and Behavioral Sciences, 2015
- Effect of Steel Fibers on the Properties of ConcreteJournal of Reinforced Plastics and Composites, 2009
- Analysis of Spirally Reinforced Prestressed Concrete PilesPCI Journal, 1990