The Cross-Sectional Investigation of Oxide Scale FeCr Alloys and Commercial Ferritic Steel Implanted with Lanthanum and Titanium Dopants after Oxidation Test at 900°C
Open Access
- 1 March 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 324 (1) , 012075
Abstract
The cross-sectional examinations of oxide scales formed by oxidation on the surface of FeCr alloys and Ferritic Steel that implanted with lanthanum and titanium dopants were observed and investigated. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) has been used to study the cross-sectional oxides produced by specimens after oxidation process. X-ray diffraction (XRD) analysis was used to strengthen the analysis of the oxide scale morphology, oxide phases and oxidation products. Cross-sectional observations show the effectiveness of La implantation for improving thinner and stronger scale/substrate interface during oxidation process. The result shows that the thickness of oxide scales formed on the surface of La implanted FeCr alloy and ferritic steel was found less than 3 µm and 300 μm, respectively. The oxide scale formed on the surface of La implanted specimens consisted roughly of Cr2O3 with a small amount of FeO mixture. The oxidation resistance of FeCr alloy that implanted with Lanthanum showed better quality than that of commercial alloy. The beneficial effect of La implanted sample on the oxidation resistance was clearly visible to improve the adherence of oxide scale. Cross-sectional observations revealed the effectiveness of La implantation for improving thinner and stronger scale/substrate interface during oxidation process which presents the homogenous structure with good adherence and a uniform inter-diffusion layer between substrate and oxide layer.Keywords
This publication has 9 references indexed in Scilit:
- Cross-Sectional Investigations of Oxide Scale Nanocrystalline FeCr Alloys after High-Temperature Oxidation Test at 900°CIOP Conference Series: Materials Science and Engineering, 2017
- Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnectsInternational Journal of Hydrogen Energy, 2013
- Materials and Processing for Metal‐Supported Solid Oxide Fuel Cells2013
- Oxidation Resistance of Unimplanted and Implanted of Nanocrystalline FeCr Alloy and Commercial Alloy with LanthanumJournal of Advanced Microscopy Research, 2011
- Effect of Nanocrystalline and Ti Implantation on the Oxidation Behaviour of Fe80Cr20 Alloy and Commercial Ferritic SteelKey Engineering Materials, 2011
- Determination of Nanocrystalline Fe80Cr20 Powder Based Alloys Using Williamson-Hall MethodAdvanced Materials Research, 2010
- The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnectsJournal of Power Sources, 2008
- Magnesium and its alloys applications in automotive industryThe International Journal of Advanced Manufacturing Technology, 2007
- A review of sealing technologies applicable to solid oxide electrolysis cellsJournal of Materials Science, 2007