The Physical and Electrical Characteristics of Ta[sub 2]O[sub 5] and Physical Vapor Deposited Ru in Metal-Insulator-Metal Capacitors
Authors:
- 1 January 2002
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 149 (6) , F56-F62
Abstract
We fabricated a tantalum pentoxide (Ta2O5)(Ta2O5) capacitor with physical vapor deposition (PVD) ruthenium (Ru) as a bottom electrode and PVD TiN as a top electrode. The physical properties of PVD Ru film and thermal stability of the multilayer were evaluated. The electrical property of the capacitor was measured in terms of leakage current density. We found that RuO2RuO2 was formed during the post heat-treatment of Ta2O5Ta2O5 at 800°C in oxygen ambient. The oxygen content in Ru increased as annealing temperature was raised to 750°C even though Ru was not oxidized yet. In nitrogen ambient, however, RuO2RuO2 was not formed after heat-treatment. We confirmed that Ru keeps its pure metallic phase after annealing by X-ray analysis (Cu Kα1,Kα1, λ=1.5405Å).λ=1.5405Å). When the film is annealed Ru grains rotate and (002) faces come off from the film surface less than 20.075°. Those grains are not detected by the low incident angle mode because their incident angle becomes less than 21.075° when the angle between incident beam and film surface is 1°. Consequently, peak intensity rapidly decreases in low incident angle mode. The increase of peak intensity in 2θ/θ mode is due to the enhancement of preferred orientation by rotation of grains and partially due to grain growth. High relative permittivity of 50 was obtained after annealing at 800°C by rapid thermal process. We also obtained low leakage current of 6×10−9A/cm26×10−9A/cm2 at ±1 V bias with 13 nm thick Ta2O5Ta2O5 film in as-deposited condition and after annealing at 600°C by furnace annealing. For obtaining a TiNTa2O5RuTiNTa2O5Ru capacitor with high permittivity and low leakage current, we need more research. © 2002 The Electrochemical Society. All rights reserved.Keywords
This publication has 23 references indexed in Scilit:
- Bottom Electrode Structures of Pt / RuO2 / Ru for Integration of ( Ba , Sr ) TiO3 Thin Films on PolysiliconJournal of the Electrochemical Society, 1999
- Bottom Electrode Structures of Pt/RuO2/Ru on Polycrystalline Silicon for Low Temperature (Ba,Sr)TiO3 Thin Film DepositionJapanese Journal of Applied Physics, 1999
- RuO2 thin film fabrication with plasma-enhanced chemical vapor depositionThin Solid Films, 1999
- Growth, microstructure, and resistivity of RuO2 thin films grown by metal-organic chemical vapor depositionJournal of Materials Research, 1998
- Oxidation resistance of tantalum–ruthenium dioxide diffusion barrier for memory capacitor bottom electrodesApplied Physics Letters, 1998
- Effects of Post-Annealing on the Conduction Properties of Pt/(Ba, Sr)TiO3/Pt Capacitors for Dynamic Random Access Memory ApplicationsJapanese Journal of Applied Physics, 1997
- Improvement of leakage currents of Pt/(Ba, Sr)TiO3/Pt capacitorsApplied Physics Letters, 1997
- Electrical Properties of Paraelectric (Pb 0.72La 0.28)TiO3 Thin Films with High Linear Dielectric Permittivity: Schottky and Ohmic ContactsJapanese Journal of Applied Physics, 1995
- Direct current conduction properties of sputtered Pt/(Ba0.7Sr0.3)TiO3/Pt thin films capacitorsApplied Physics Letters, 1995
- Reactive ion etching of RuO2 thin films using the gas mixture O2/CF3CFH2Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1994