DSP Implementation of the Multiple Reference Frames Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive
Authors:
- S.M.A. CruzS.M.A. Cruz
- H.A. ToliyatHTH.A. Toliyat
- A.J.M. CardosoA.J.M. Cardoso
- 23 May 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 20 (2) , 329-335
Abstract
This paper deals with the use of a new diagnostic technique based on the multiple reference frames theory for the diagnosis of stator winding faults in a direct-torque-controlled (DTC) induction motor drive. The theoretical aspects underlying the use of this diagnostic technique are presented but a major emphasis is given to the integration of the diagnostic system into the digital-signal-processor (DSP) board containing the control algorithm. Taking advantage of the sensors already built in the drive for control purposes, it is possible to implement this diagnostic system at no additional cost, thus giving a surplus value to the drive itself. Experimental results show the effectiveness of the proposed technique to diagnose stator faults and demonstrate the possibility of its integration in the DSP board.Keywords
This publication has 14 references indexed in Scilit:
- On-line stator winding fault diagnosis in inverter-fed AC machines using high frequency signal injection2003
- Closed loop control impact on the diagnosis of induction motors faults2003
- A new approach to on-line turn fault detection in AC motors2002
- Transient model for induction machines with stator winding turn faultsIEEE Transactions on Industry Applications, 2002
- A multiple reference frame synchronous estimator/regulatorIEEE Transactions on Energy Conversion, 2000
- On-line stator winding faults detection in inverter fed induction motors by stator current reconstruction1999
- Multiple reference frame analysis of non-sinusoidal brushless DC drivesIEEE Transactions on Energy Conversion, 1999
- Transient analysis of cage induction machines under stator, rotor bar and end ring faultsIEEE Transactions on Energy Conversion, 1995
- Multiple reference frame analysis of an unsymmetrical induction machineIEEE Transactions on Energy Conversion, 1993
- Alternatives for assessing the electrical integrity of induction motorsIEEE Transactions on Industry Applications, 1992