Numerical investigation of the combustion characteristics and wall impingement with dependence on split-injection strategies from a gasoline direct-injection spark ignition engine
Authors:
- 13 June 2013
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 227 (11) , 1518-1535
Abstract
Highly pressurized direct injection applied to automotive vehicles was developed for better power and fuel efficiency, but it causes fuel impingement, which generates more soot emissions. In the present study, analyses of the combustion characteristics and fuel impingement were conducted with a direct-injection spark ignition engine using split-injection strategies. Full three-dimensional unsteady Eulerian–Lagrangian two-phase numerical simulations were carried out to predict the flow field and the combustion characteristics as functions of the injection duration ratio and the weight of the second pulse injection. Experimental data were coupled for verification, providing the boundary and initial conditions for the benchmark case. The results showed that the weight of injection became maximally 35% less as the weight of the second pulse injection decreased. The amount of liquid fuel film, which was influenced by the injection duration ratio, had a varying range from approximately 1% to 4%. When a greater amount of the liquid fuel film impinged on the piston surface, this induced more soot formation. However, the fuel–air mixture was the most prominent factor for determining the overall combustion characteristics. A split injection can increase the thermal efficiency and the fuel consumption rate; however, without optimization, poor combustion characteristics such as knocking, incomplete combustion and soot emissions can result.Keywords
This publication has 42 references indexed in Scilit:
- Increasing energy efficiency of a gasoline direct injection engine through optimal synchronization of single or double injection strategiesEnergy Conversion and Management, 2012
- Imaging and heat flux measurements of wall impinging sprays of hydrocarbons and alcohols in a direct-injection spark-ignition engineFuel, 2012
- Effect of a split-injection strategy on the performance of stratified lean combustion for a gasoline direct-injection engineProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011
- Full-bore crank-angle resolved imaging of combustion in a four-stroke gasoline direct injection engineProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2007
- High-speed imaging of OH* and soot temperature and concentration in a stratified-charge direct-injection gasoline engineProceedings of the Combustion Institute, 2005
- Interaction of a premixed flame with a liquid fuel film on a wallProceedings of the Combustion Institute, 2005
- Enhancement of Stratified Charge for DISI Engines through Split Injection(Effect and Its Mechanism)JSME International Journal Series B, 2005
- Downsizing of Gasoline Engine: an Efficient Way to Reduce CO2 EmissionsOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2003
- Fundamentals of fuel film formation and motion in SI engine induction systemsEnergy Conversion and Management, 2001
- Automotive spark-ignited direct-injection gasoline enginesProgress in Energy and Combustion Science, 1999