Interlayer Friction Mechanism and Scale Effects in Ultra-Thin TA1 Titanium Alloy/Carbon Fiber-Reinforced Plastic Laminates
Open Access
Abstract
Fiber metal laminates (FMLs) are a novel lightweight composite material, predominantly utilized in the aerospace sector for large-scale components like skin panels and fuselages. However, research on FMLs in the microsystem domain remains limited. Additionally, they are influenced by scale effects, rendering macroscopic forming theories inadequate for microforming applications. The application of ultra-thin fiber metal laminates in the microsystem field is hindered by this constraint. This paper investigates the friction performance of ultra-thin TA1 titanium alloy/carbon fiber-reinforced plastic (CFRP) laminates at the microscale. The content of the epoxy resin used is 38.0 ± 3.0%. Friction tests on ultra-thin TA1/CFRP laminates were conducted based on the Striebeck friction theory model. The effects of factors such as the weaving method, ply angle, normal force, tensile speed, and temperature on friction performance are explored in the study. Furthermore, the influences of geometric scale and grain scale on friction performance are examined. Geometric scale effects indicate that an increase in laminate width leads to an increase in the friction coefficient. Grain-scale effects demonstrate that as grain size increases, the friction coefficient also increases, attributed to reduced grain boundaries, increased twinning, and increased surface roughness of the metal. Finally, surface morphology analysis of the metal and fiber after friction tests further confirms the influence of grain size on the friction coefficient. Through detailed experimental design, result analysis and graphical representation, this paper provides a scientific basis for understanding and predicting the friction behavior of ultra-thin TA1/CFRP laminates.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
- National Natural Science Fund of China (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
- Tianjin “Project + Team” Key Training Program (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
- Local Science and Technology Development Fund Projects Guided by the Central Government of China (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
- Key Program of Research and Development of Hebei Province (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
- Natural Science Foundation of Hebei Province (2023YFB2504604, 52005153, XC202052, 206Z1803G, 23311812D, E2023202183)
This publication has 34 references indexed in Scilit:
- Experimental and analytical assessment of the hypervelocity impact damage of GLAss fiber REinforced aluminumDefence Technology, 2022
- Investigation of the friction behavior between dry/infiltrated glass fiber fabric and metal sheet during deep drawing of fiber metal laminatesProduction Engineering, 2022
- An inter-ply friction model for thermoset based fibre metal laminate in a hot-pressing processComposites Part B: Engineering, 2021
- Interactive effect of grain size and crystal structure on deformation behavior in progressive micro-scaled deformation of metallic materialsInternational Journal of Machine Tools and Manufacture, 2020
- Investigation on impact behavior of FMLs under multiple impacts with the same total energy: Experimental characterization and numerical simulationComposite Structures, 2019
- Mechanical analysis and progressive failure prediction for fibre metal laminates using a 3D constitutive modelComposites Part A: Applied Science and Manufacturing, 2019
- Interlaminar failure behavior of GLARE laminates under double beam five-point-bending loadComposite Structures, 2018
- An innovative approach for detection of surface quality based on specific work environment using experiments, aerodynamic simulation, and theoretical analysisThe International Journal of Advanced Manufacturing Technology, 2017
- Development of sheet metal active-pressurized hydrodynamic deep drawing system and its applicationsInternational Journal of Mechanical Sciences, 2013
- Manufacturing and mechanical properties of thermoplastic hybrid laminates based on DP500 steelComposites Part A: Applied Science and Manufacturing, 2009