A Thermohydrodynamic Lubrication Analysis to Design Large Two-Pad Journal Bearing With Cooling Ditches
Authors:
- 1 April 1998
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 120 (2) , 214-220
Abstract
A newly developed large two-pad journal bearing with cooling ditches and viscous pump for turbines of electric utilities was analyzed theoretically. The turbulent thermohydrodynamic lubrication analysis was done in connection with the flow analysis of oil circulating system through the cooling ditches and the viscous pump. The complicated simultaneous equations concerned with the oil flow in the bearing were solved and used to design a bearing of 535 mm diameter which will make its appearance in a near future. Full size bearing tests were carried out to check the bearing performance and viscous pump performance and to confirm the accuracy of the calculation method. Good agreement was obtained between the theoretical and experimental results.Keywords
This publication has 10 references indexed in Scilit:
- Thermohydrodynamic Analysis of Tilting-Pad Journal Bearings Operating in Turbulent Flow RegimeJournal of Tribology, 1996
- Inlet Pressure Effects on the Thermohydrodynamic Performance of a Large Tilting Pad Journal BearingJournal of Tribology, 1995
- Thermohydrodynamic Analysis of a Journal Bearing in a Turbulent Flow Regime—Part II: Application to an Axial Groove BearingTribology Transactions, 1994
- A Study of the Thermal Characteristics of the Leading Edge Groove and Conventional Tilting Pad Journal BearingsJournal of Tribology, 1993
- The Analysis of Pivoted Pad Journal Bearing Assemblies Considering Thermoelastic Deformation and Heat Transfer EffectsTribology Transactions, 1992
- Thermohydrodynamic Performance of a Tilting Pad Journal Bearing With Spot LubricationJournal of Tribology, 1991
- The Effect of Different Lubrication Methods on the Performance of a Tilting-Pad Journal BearingTribology Transactions, 1991
- A Thermohydrodynamic Analysis of Large Tilting-Pad Journal Bearing in Laminar and Turbulent Flow Regimes With MixingJournal of Tribology, 1990
- Heat transfer in automobile radiators of the tubular typeInternational Communications in Heat and Mass Transfer, 1985
- A Linearized Turbulent Lubrication TheoryJournal of Basic Engineering, 1965