Research on the Effect of Fire Thermal Energy on the Microstructure and Properties Mechanical of Fiber-Reinforced Cement Mortars
Open Access
Abstract
Cement mortar is made of a combination of cement, sand, and water, mixed in the right proportions. It is ideal for erecting walls and masonry structures, including those that must bear heavy loads. In addition, it is used in places that are exposed to higher humidity and in facilities located below ground level. The potential uses of a mortar are determined by material modification. The aim of the experimental studies was to evaluate the effect of high temperature on the microstructure and mechanical properties of cement mortars modified with polypropylene fiber. The novelty of this study is an attempt to compare the use of different types of polypropylene fibers in mortars heated at different temperatures. Cement mortars based on Portland cement CEM I 42.5 R with a constant content of three types of fibers in the amount of 0.9 kg/m3 were designed. The samples were cured and then heated in an oven at 300, 500 and 700 °C. The functional properties of cement mortars, i.e., density, flexural and compressive strength after 28 and 56 days of maturation, as well as flexural and compressive strength at elevated temperature, were determined using samples of 40 × 40 × 160 mm. By modifying cement mortars with fibers, it is possible to obtain a cement composite with good strength parameters which is, at the same time, resistant to high temperature.Keywords
This publication has 41 references indexed in Scilit:
- Use of recycled concrete aggregate in fly-ash concreteConstruction and Building Materials, 2012
- The durability properties of polypropylene fiber reinforced fly ash concreteMaterials & Design (1980-2015), 2011
- The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concreteConstruction and Building Materials, 2010
- Improvement of the mechanical properties of glass fibre reinforced plastic waste powder filled concreteConstruction and Building Materials, 2010
- Material and structural performance evaluation of recycled PET fiber reinforced concreteCement and Concrete Composites, 2010
- Temperature, pore pressure and mass variation of concrete subjected to high temperature — Experimental and numerical discussion on spalling riskCement and Concrete Research, 2010
- Strength properties of nylon- and polypropylene-fiber-reinforced concretesCement and Concrete Research, 2005
- Effects of waste PET bottles aggregate on the properties of concreteCement and Concrete Research, 2005
- High-temperature behaviour of HPC with polypropylene fibresCement and Concrete Research, 2001
- Durability of Portland blast-furnace slag cement concreteCement and Concrete Composites, 1999