Micromachined droplet ejector arrays for controlled ink-jet printing and deposition
Authors:
- 1 May 2002
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 73 (5) , 2193-2196
Abstract
In this article, we present a variation on the design of the micromachined flextensional transducer for use to eject liquids. The transducer is constructed by depositing a piezoelectric thin film to a thin, edge clamped, circular annular plate. By placing a fluid behind one face of a vibrating compound plate that has an orifice at its center, we achieve continuous or drop-on-demand ejection of the fluid. We present results of ejection of water and isopropanol. The ejector is harmless to sensitive fluids and can be used to eject fuels, organic polymers, low-k dielectrics, chemical, and biological samples. Micromachined two-dimensional array piezoelectrically actuated flextensional droplet ejectors were realized using planar silicon micromachining techniques. Typical resonant frequency of the micromachined device ranges from 400 kHz to 4.5 MHz. The ejection of water through a 5 μm diameter orifice at 3.5 MHz was demonstrated by using the developed micromachined two-dimensional array ejectors.Keywords
This publication has 10 references indexed in Scilit:
- Organic/polymeric electroluminescent devices processed by hybrid ink-jet printingJournal of Materials Science: Materials in Electronics, 2000
- Dual-color polymer light-emitting pixels processed by hybrid inkjet printingApplied Physics Letters, 1998
- Controlled ink-jet printing and deposition of organic polymers and solid particlesApplied Physics Letters, 1998
- Local tuning of organic light-emitting diode color by dye droplet applicationApplied Physics Letters, 1998
- Polymer electroluminescent devices processed by inkjet printing: I. Polymer light-emitting logoApplied Physics Letters, 1998
- Ink-jet printing of doped polymers for organic light emitting devicesApplied Physics Letters, 1998
- Optimum Design Procedure for Multi-Pinhole-Plate Ultrasonic AtomizerJapanese Journal of Applied Physics, 1987
- Influence of the vibrating system of a multipinhole-plate ultrasonic nebulizer on its performanceReview of Scientific Instruments, 1986
- Mechanism of ultrasonic atomization using a multipinhole plate.Acoustical Science and Technology, 1985
- The Generation of Monodisperse Aerosols by Means of a Disintegrated Jet of LiquidReview of Scientific Instruments, 1969