Effect of lime and cement fillers on moisture susceptibility of cold mix asphalt
Authors:
- 20 September 2021
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 23 (10) , 2433-2449
Abstract
Cold mix asphalt (CMA) has many economic and environmental benefits but its higher moisture susceptibility reduce its use to minor construction and repairing work. To increase the field implementation of CMA, it is very necessary to reduce its moisture susceptibility. So present study examines the effect of lime and cement filler on the moisture susceptibility of CMA. In the study, lime and cement fillers were used in varying proportions i.e. 1% to 5%. Based on volumetric properties and minimum emulsion content criteria, 2% was found to be optimum content for both lime and cement fillers. From Marshall stability, retained Marshall stability, Indirect tensile strength, and Tensile strength ratio values it was found that both fillers considerably improve moisture susceptibility of cold mixes. Energy consumption and cost comparison further concluded that as compared to HMA, incorporation of cement and lime fillers in cold mixes results in economic and environment-friendly mixes.Keywords
This publication has 13 references indexed in Scilit:
- Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixturesMaterials & Design, 2016
- Philosophy of utilization of slag in civil infrastructure construction2016
- Investigating Filler Characteristics in Upgrading Cold Bituminous Emulsion MixturesInternational Journal on Pavemnet Engineering & Asphalt Technology, 2014
- Evaluating Moisture Susceptibility of Cold-Mix AsphaltTransportation Research Record: Journal of the Transportation Research Board, 2014
- Mechanical Properties of an Upgrading Cold-Mix Asphalt Using Waste MaterialsJournal of Materials in Civil Engineering, 2012
- Influence of cement content and environmental humidity on asphalt emulsion and cement composites performanceMaterials and Structures, 2012
- Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsionConstruction and Building Materials, 2009
- Effect of Cement on Emulsified Asphalt MixturesJournal of Materials Engineering and Performance, 2007
- High strength concrete containing natural pozzolan and silica fumeCement and Concrete Composites, 2000
- Physical and Chemical Characteristics of Blast Furnace, Basic Oxygen Furnace, and Electric Arc Furnace Steel Industry SlagsEnvironmental Science & Technology, 2000