Thermal and thermo-catalytic conversion of waste polyolefins to fuel-like mixture of hydrocarbons
Open Access
- 1 March 2012
- journal article
- Published by Polish Academy of Sciences Chancellery in Chemical and Process Engineering: New Frontiers
- Vol. 33 (1) , 185-198
Abstract
Thermal and thermo-catalytic conversion of waste polyolefins to fuel-like mixture of hydrocarbons: Results of the investigation of thermal degradation of polyolefins in the laboratory-scale set-up reactors are presented in the paper. Melting and cracking processes were carried out in two different types of reactors at the temperature of 390-420°C. This article presents the results obtained for conversion of polyolefin waste in a reactor with a stirrer. Next, they were compared with the results obtained for the process carried out in a reactor with a molten metal bed, which was described in a previous publication. For both processes, the final product consisted of a gaseous (2-16 % mass) and a liquid (84-98 % mass) part. No solid product was produced. The light, "gasoline" fraction of the liquid hydrocarbons mixture (C4-C10) made up over 50% of the liquid product. The overall (vapor) product may be used for electricity generation and the liquid product for fuel production.Keywords
This publication has 13 references indexed in Scilit:
- Thermal conversion of waste polyolefins to the mixture of hydrocarbons in the reactor with molten metal bedEnergy Conversion and Management, 2010
- Catalytic degradation of plastic waste into petrochemicals using Ga-ZSM-5Fuel, 2008
- Fuels from Waste Plastics by Thermal and Catalytic Processes: A ReviewIndustrial & Engineering Chemistry Research, 2008
- Use of recycled plastic in concrete: A reviewWaste Management, 2008
- Plastics – still young, but having a mature impactWaste Management, 2008
- Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixturesResources, Conservation and Recycling, 2007
- Thermal depolymerisation of scrap polymersApplied Thermal Engineering, 2002
- Catalytic degradation of polypropylene: effect of dealumination of clinoptilolite catalystPolymer Degradation and Stability, 2002
- Pyrolysis of mixed polyolefins in a fluidised-bed reactor and on a pyro-GC/MS to yield aliphatic waxesPolymer Degradation and Stability, 2000
- Thermal and chemical recycle of waste polymersCatalysis Today, 1996